« previous next »
Pages: [1]   Go Down

Author Topic: Dating a Ruger 77??  (Read 1087 times)

0 Members and 1 Guest are viewing this topic.

Offline bomtek44

  • Trade Count: (0)
  • Member
  • *
  • Posts: 48
Dating a Ruger 77??
« on: December 10, 2007, 07:23:12 AM »
I have a pre-warning M-77R that has a serial number beginning with 72. Is there a sticky or can a knowledgeable Guru advise the year of manufacture?

Thanks,
Logged
bomtek44

Offline John Traveler

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1359
Re: Dating a Ruger 77??
« Reply #1 on: December 10, 2007, 08:05:28 AM »
The Ruger website lets you determine year of manufacture from your model and serial number
Logged
John Traveler

Offline Hairtrigger

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 2010
Re: Dating a Ruger 77??
« Reply #2 on: December 10, 2007, 10:50:22 AM »
The Ruger website will tell you when the receiver was made. In most cases that won't be terribly far from the rifle mfg date but atleast with the No.1 rifles there can be quite a spread
Logged

Offline Rangr44

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 2158
Re: Dating a Ruger 77??
« Reply #3 on: December 10, 2007, 01:23:34 PM »
Hairtrigger's correct.

At www.ruger.com , the serial number history section gives the starting serial number for each model for every Jan 1st.

The receivers, like every other Ruger part, gets dumped into inventory and pulled out at random for assembly as required when a run of that particular model is made - which could be every month or once every other year, depending upon the demand for the model in question.

A phone call, to the Ruger Service Dept, with the model/serial #, will get you the date and configuration any gun was shipped.
Logged
There's a Place for All God's Creatures - Right Next to the Potatoes & Gravy ! !

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
Re: Dating a Ruger 77??
« Reply #4 on: January 05, 2008, 10:28:50 AM »
Case in point maybe... my 77R 270 Win comes up as 1974 by it's serial number, but the dealer I got it from had just got it in from the distributor new when I bought it in 1977.   270's were very popular then in the Rocky Mountain states thanks to the writings of Jack O'Connor, and my dealer had a hard time keeping them in stock.   I had to reserve it ahead to get it when I did - there was a waiting list to get one.   Who knows whether it had sat in the Ruger inventory or the distributors for about 3 years though.    Well worth the wait though.    A lot of mule deer, elk, pronghorns, couple of black bear, one caribou, one moose and a bunch of predators fell to it before I stopped hunting with it.
Logged
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline BlkHawk73

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1501
  • Gender: Male
Re: Dating a Ruger 77??
« Reply #5 on: January 05, 2008, 11:19:48 AM »
  Manufacture date is one thing, shipping date is a complete other  thing.  EX:  Ruger recently cleaned out a lot of old inventory, some reboxed in current style boxes.  Some of these models have been out of production for 8 or 10 years or more and are just now being shipped.  It's this excess inventory that sits around and/or get's shuffled around that's caused them to go to a Lean manufactruing concept.  Less overhead sitting idle in inventory for them.
Logged
"Never Surrender, Just Carry On."  - G.S.

Offline Hairtrigger

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 2010
Re: Dating a Ruger 77??
« Reply #6 on: January 05, 2008, 11:38:37 AM »
I know it's a different company but I have a Browning BL-22 with a date code of 1968. Browning says they did not make the BL-22 until 1969. I assume the date gets stamped into the receiver when it is made not when the gun is assembled
Logged
Pages: [1]   Go Up
« previous next »