Author Topic: sportster ss1 22.  (Read 638 times)

0 Members and 1 Guest are viewing this topic.

Offline TMP47

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
sportster ss1 22.
« on: January 07, 2008, 09:04:55 PM »
Hey guys maybe you can help me out. I picked up a sportster 22 that comes with the rail base. I had some medium rings that I put on but the scope would not sit in it as it hit the hammer. What rings do I need to buy for it and where is a good place to buy them? Also would need a hammer side ext.  Thanks Kerry

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: sportster ss1 22.
« Reply #1 on: January 08, 2008, 05:37:40 AM »
Usually high rings are needed without hammer modificatiion, see the "Rings" link in the FAQs and Help sticky to see what others are using, you can probably use the rings you have if you trim the hammer a tad and add a hammer extension which you can buy from H&R or most sporting goods retailers, the H&R extension is made by Uncle Mike's. You can also put a want to buy ad in the NEF Classifieds for one.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline TMP47

  • Trade Count: (0)
  • Member
  • *
  • Posts: 29
Re: sportster ss1 22.
« Reply #2 on: January 08, 2008, 12:38:26 PM »
Hey Tim where do I find the rings link in the sticky

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: sportster ss1 22.
« Reply #3 on: January 08, 2008, 01:46:19 PM »
Where it say RINGS just down from the base pics. ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain