stock replacment

[currie]

 does any body know of an easy way to remove the butt stock on a optima elite.My allen wrench is to short for the job,and i dont want to cut a hole in the bottom of the stock.Any adivice on this problem would be greatly appreciated.

[quickdtoo]

You'll need a 3/8" drive wobble ext or a universal joint and a 6mm hex socket tool.

Tim

http://www.toolsource.com/wobble-socket-extension-p-69726.html

http://www.toolsource.com/universal-socket-p-56746.html?osCsid=9rgqbc3jeu14ks2amet6ar2u62

[currie]

Thanks for the reply.Now, just round up the tools and get it done.

[stringofpoloponies]

if you have a 6mm bit itself you can cheat by putting the bit in a 1/4 inch socket and then to a long  1/4 inch extension to a ratchet. i just use a single wrap of electrical tape to keep the bit from popping out of the 1/4 socket.make sure you use the right bit and lined up straight and use even pressure. its easy to booger and round up the head of the bolt.