« previous next »
Pages: [1]   Go Down

Author Topic: Advice on bullet  (Read 1221 times)

0 Members and 1 Guest are viewing this topic.

Offline Phoneman

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 162
Advice on bullet
« on: January 15, 2008, 05:22:00 PM »
I'm going on a spring black bear hunt in Montana this year. I have a browning blr .308. I would like to use a 160 gr. bullet. Is a sierra hpbt good enough? I don't see a point in buying a premium solid copper bullet if a sierra would work. I don't follow all the hype about a Magnum cartridge or a super expensive bullet. I think accuracy is key. Any thoughts?
Logged

Offline 1sourdough

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1003
  • Gender: Male
Re: Advice on bullet
« Reply #1 on: January 16, 2008, 12:05:40 AM »
 I like the 308 & have 3. I would load a 165grn Partition for your 308 & make sure you can put the bullet right where you need to. You could practice with cheaper ammo/bullets & do a final zero check with your hunting rounds before the hunt. Western spring bear hunting sounds like a longer shot opportunity than the bait pile methods. My bear setup is 180grn partitions out of a 300WSM.
Logged
NRA, Veteran

Offline PA-Joe

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 980
Re: Advice on bullet
« Reply #2 on: January 16, 2008, 04:03:22 AM »
One of the Hornady interbonds would be good to.
Logged

Offline victorcharlie

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3573
Re: Advice on bullet
« Reply #3 on: January 16, 2008, 03:29:05 PM »
Quote from: Phoneman on January 15, 2008, 05:22:00 PM
I'm going on a spring black bear hunt in Montana this year. I have a browning blr .308. I would like to use a 160 gr. bullet. Is a sierra hpbt good enough? I don't see a point in buying a premium solid copper bullet if a sierra would work. I don't follow all the hype about a Magnum cartridge or a super expensive bullet. I think accuracy is key. Any thoughts?

My guess is it'll do just fine......

I've got to agree with you......put the bullet where it needs to go and it'll do the job.......
Logged
"Extremism in the defense of liberty is no vice. Tolerance in the face of tyranny is no virtue."
Barry Goldwater

Offline deltecs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1605
  • Gender: Male
Re: Advice on bullet
« Reply #4 on: January 16, 2008, 04:33:49 PM »
I like Sierra bullets but for black bear, I don't thing the hollow points would be my choice.  I think they are a bit too frangible if the bullet hits bone and may not penetrate into the vital areas.  I think you would be better serviced with a core and cup soft point.
Logged
Greg lost his battle with cancer last week on April 2nd 2009. RIP Greg. We miss you.

Greg
deltecs
Detente: An armed citizenry versus a liberal society
Opinion(s) are expressly mine alone and do not necessarily agree with those of GB or GBO mgmt.

Offline Cheesehead

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3282
  • Gender: Male
Re: Advice on bullet
« Reply #5 on: January 16, 2008, 04:54:08 PM »
If you want a standard bullet that is an effective, inexpensive, deep perpetrator for the 308 Winchester, try a CoreLokt in 165 or 180 grain. These can be bought in bulk quantities for a reasonable price. My hunting buddy has shot dozens of deer with the 180 in 308 at ranges to 200 yards. Total penetration was always the rule at any angle. Postmortem during the butchering process verified this.

Cheese
Logged
Nothing in the world is more dangerous than sincere ignorance.

Offline wyocarp

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 125
Re: Advice on bullet
« Reply #6 on: January 30, 2008, 08:55:41 PM »
I wouldn't use a hollow point.  Where in Montana are you going to be hunting?  Are you going to be around grizzly?
Logged

Offline BIG JAKE

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 232
Re: Advice on bullet
« Reply #7 on: January 31, 2008, 04:28:25 AM »
I believe that bullet is target bullet. I'd use their 165gr btsp gameking if its spot and stalk.
Logged
squeeze it, don't pull it!!!!

Offline wyocarp

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 125
Re: Advice on bullet
« Reply #8 on: January 31, 2008, 10:00:58 AM »
This is a comment I read on that bullet. 

"Its good ballistic shape and relatively light weight make it a good choice for target shooting and plinking at short to medium ranges."

That is not a bullet I would go bear hunting with.
Logged

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3636
Re: Advice on bullet
« Reply #9 on: February 01, 2008, 09:56:35 AM »
  In a .308 Win. for blk. bears, i'd also use a Nosler Partition in 165 grain...  or if i wasn't going with that tough of a bullet, i'd step up to 180's in a std. bullet...

  I always had better luck with Speer bullets on big game, than Sierra'a...

  DM
Logged
Pages: [1]   Go Up
« previous next »