Author Topic: Accessory Barrel storage ??  (Read 630 times)

0 Members and 1 Guest are viewing this topic.

Offline krod47nw

  • GBO Supporter
  • Trade Count: (250)
  • Senior Member
  • *****
  • Posts: 1133
  • Gender: Male
Accessory Barrel storage ??
« on: February 03, 2008, 02:31:02 PM »
I have all of these handi barrels that are just leaning in my safe.  Surely with all of the creative minds on this forum, someone has come up with a rack for them or some ingenious method of storing them?   They keep falling down, as they don't balance well with scopes attached.  I'm going to build something, and need ideas.


Kevin
The beauty of the Second Amendment is that it will not be needed until they try to take it.  Thomas Jefferson

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Accessory Barrel storage ??
« Reply #1 on: February 03, 2008, 02:43:59 PM »
Put em on their own frame, that's the best I've come up with!!  ;D I used to store 4 of em in double gun case, that's the most extra barrels I've ever had at one time.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline McLernon

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1217
Re: Accessory Barrel storage ??
« Reply #2 on: February 03, 2008, 03:07:13 PM »
Technically(at least in Canuckistan), barrels and scopes don't have to be locked-up. I store some of my rifles, less breech blocks, under my bed in a Rubber-Maid container.

Mc ;D

Offline rbergum95

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 373
  • Gender: Male
  • Theres no luck in lead unless it's flyin'.
Re: Accessory Barrel storage ??
« Reply #3 on: February 03, 2008, 03:28:35 PM »
i have come up with a way that works for me. take a 1 inch diameter dowel rod about 6 inches long and drill a 1/4 inch hole through the middle. into that hole glue a 1/4 inch dowel rod about 3 feet long. when you are done it will look like a wooden cleaning rod. slide that in from the breech end through the barrel and you can store them upright without the scope hitting the ground. the 1/4 inch rods work well for .30 cals and up, you can get smaller diameter rods or sand down the 1/4 inch rods for smaller calibers. ill have to get some pics of mine to post to show you how they really look.

ron

Offline b44mag

  • Trade Count: (17)
  • A Real Regular
  • ****
  • Posts: 750
  • Gender: Male
Re: Accessory Barrel storage ??
« Reply #4 on: February 03, 2008, 05:45:53 PM »
hey me and my buddy were just talking about this.  we thought about putting a rack on the side of the gun cabinet.  some thing like a poolstick rack .    i have to think about the top board . how to cut the openings to put the barrel with scope on it . something like a Nike swoosh that would let the barrel lean a little bit so not to fall out . still thinking about it.  i think they have some poolstick racks at Ollie's cheap might have to go look at them just my 2 cents
                                                                                                                                           b44mag

Offline 30-06man

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2604
Re: Accessory Barrel storage ??
« Reply #5 on: February 03, 2008, 06:00:56 PM »
Buy more frames. :D But to be serious I haven't found out a good way to store any barrels yet. I have tried everything I could think of and settled on something similar to Ron's.
The sportsman lives his life vicariously. For he secretly yearns to have lived before, in a simpler time. A time when his love for the land, water, fish and wildlife would be more than just part of his life. It would be his state of mind

Rick

Offline krod47nw

  • GBO Supporter
  • Trade Count: (250)
  • Senior Member
  • *****
  • Posts: 1133
  • Gender: Male
Re: Accessory Barrel storage ??
« Reply #6 on: February 03, 2008, 06:03:15 PM »
hey me and my buddy were just talking about this.  we thought about putting a rack on the side of the gun cabinet.  some thing like a poolstick rack .    i have to think about the top board . how to cut the openings to put the barrel with scope on it . something like a Nike swoosh that would let the barrel lean a little bit so not to fall out . still thinking about it.  i think they have some poolstick racks at Ollie's cheap might have to go look at them just my 2 cents
                                                                                                                                           b44mag

That's sort of where I was going with the idea.  I was thinking about a bar across the top that would close the slots and could be either hinged to the side, or slide out of the way.
The beauty of the Second Amendment is that it will not be needed until they try to take it.  Thomas Jefferson

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: Accessory Barrel storage ??
« Reply #7 on: February 03, 2008, 07:46:37 PM »
Or if you wanted to hang them from a wall you could just use 2 flat boards 1/2"x2"xhowever long ya wanted and just stick dowels in them and attach to wall spaced at a happy width. or you could use same idea and get fancy with router and wood lathe. Kurt
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: Accessory Barrel storage ??
« Reply #8 on: February 04, 2008, 01:12:12 PM »
Do like i do , hang some peg board and use the long strait hooks with 1/4" rubber tubing over them .

stimpy
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline mariog

  • Trade Count: (0)
  • Member
  • *
  • Posts: 62
Re: Accessory Barrel storage ??
« Reply #9 on: February 04, 2008, 01:16:53 PM »
hey me and my buddy were just talking about this.  we thought about putting a rack on the side of the gun cabinet.  some thing like a poolstick rack .    i have to think about the top board . how to cut the openings to put the barrel with scope on it . something like a Nike swoosh that would let the barrel lean a little bit so not to fall out . still thinking about it.  i think they have some poolstick racks at Ollie's cheap might have to go look at them just my 2 cents
                                                                                                                                           b44mag

Ollie's!? You must be in the York Harrisburg area. I lived in that area for 15 years.
Now in New Hampshire.

Offline Hofs01

  • GBO Supporter
  • Trade Count: (37)
  • A Real Regular
  • *****
  • Posts: 581
  • Gender: Male
Re: Accessory Barrel storage ??
« Reply #10 on: February 04, 2008, 04:07:21 PM »
I got this picture a few years back when a few of us did this same type of talking on a Yahoo board.

I do not know who made it I just liked it!


IF we're not supposed to eat animals,
how come God made 'em outta meat?

Offline krod47nw

  • GBO Supporter
  • Trade Count: (250)
  • Senior Member
  • *****
  • Posts: 1133
  • Gender: Male
Re: Accessory Barrel storage ??
« Reply #11 on: February 04, 2008, 04:22:57 PM »
That's a nice setup.   
The beauty of the Second Amendment is that it will not be needed until they try to take it.  Thomas Jefferson