Author Topic: 45 cal kodiak loads  (Read 936 times)

0 Members and 1 Guest are viewing this topic.

Offline reward

  • Trade Count: (33)
  • Contributor
  • ***
  • Posts: 340
45 cal kodiak loads
« on: August 10, 2007, 12:39:29 PM »
Anybody have a favorite 45 cal kodiak loads they are using?

Offline sidekick

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 121
Re: 45 cal kodiak loads
« Reply #1 on: August 11, 2007, 03:54:46 PM »
I never found one. That's why I got rid of mine and got an Encore .50 cal. I would stay away from powerbelts for sure, they were all over the place. Standard 209 primers did not work well either. Had my best success with loose 777 powder, vari-flame primer (small rifle) system. I would try the Winchester 777 primers first if I had it to do over. Bullets from Precision Rifle Muzzleloader. www.prbullet.com  I think is the address. Good luck.

Offline oldrookie

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 119
Re: 45 cal kodiak loads
« Reply #2 on: August 12, 2007, 05:28:12 AM »
sidekick I have a .50 optima. What I have read you might want to try a hornady xtp in .44 pushed by 90-100g of 777 2F. I personally like the 777 209 primer. Seems to keep the 777 crud to a minimum. I see where a lot of guys like the speer gold dot in .44 as well.

Offline william_75

  • Trade Count: (2)
  • Member
  • *
  • Posts: 38
Re: 45 cal kodiak loads
« Reply #3 on: September 24, 2007, 12:11:07 AM »
190 hp power belts 100gr 777 and win 209's work great for me.

Offline Buckskins & Black Powder

  • Moderator
  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1700
  • Gender: Male
    • Buckskins & Black Powder
Re: 45 cal kodiak loads
« Reply #4 on: September 24, 2007, 05:02:34 PM »
Anybody have a favorite 45 cal kodiak loads they are using?

Try 80 grains of triple 7 with a 225,275 or 300 grain powerbelt.

I used a 225 grain powerbelt with 80 grains triple 7 and the damage to the deer was simply amazing.

Offline reward

  • Trade Count: (33)
  • Contributor
  • ***
  • Posts: 340
Re: 45 cal kodiak loads
« Reply #5 on: September 25, 2007, 11:38:17 AM »
Thanks guys, I am going out this week to try to work up a better load, season starts the 13th!

Offline E5B

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Re: 45 cal kodiak loads
« Reply #6 on: February 04, 2008, 04:09:25 AM »
I have a 45 Cal Kodiak and it took me over a year to find a decent load for it.  Finally came up with 300 power belt platinum with 100 gr 777 and a 777 209 primer.  It still doesn't group as good as I'd like for hunting.  It also has a significant amount of "blow-back" out of the breech plug and after 10 shots or so there is a thin layer of carbon on the bottom of my scope.  Anyone else have this issue?  Breech plug is tight and action is closed all the way and it still happens.  I'm going to go ahead and keep this and keep playing around with it. 

I went ahead and purchased a T/C Omega 50 cal and the second time to the range I was putting the bullet through the same hole at 50 yards and grouping less than an inch at 100.