« previous next »
Pages: [1]   Go Down

Author Topic: 32-20, 32-H&R Mag, 32 ACP etc.  (Read 1333 times)

0 Members and 1 Guest are viewing this topic.

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
32-20, 32-H&R Mag, 32 ACP etc.
« on: February 17, 2008, 04:34:53 PM »
Anyone thinking of a Stubbing project to one of the .32 cals take a read.  I am finishing up a .32 stub project, the donor barrel was a 20 gauge and the barrel was a takeoff British .303 which I think is selling for $12.00 on one of the gun sites.  These are a near perfect match, the 20 gauge bore and outside barrel diameter match up extremely well to mate these two.  I have a couple of pictures, the barrel is screwed in to a threaded collar that goes in from the breach end, the barrel through the stub is about .620 which is what the bore of the 20 gauge is infront of the forcing cone, and that leaves the .303 barrel with enough diamerter to make a nice sholder to tighten up against.  Cannot really tell where the stub and barrel join.  I would really like to keep this one!  Larry






Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline moxgrove

  • GBO Supporter
  • Trade Count: (3)
  • Contributor
  • *****
  • Posts: 469
  • Gender: Male
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #1 on: February 18, 2008, 04:10:26 AM »
That's an awesome job!  Your stub projects always have me drooling.
Logged

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #2 on: February 18, 2008, 04:32:44 AM »
That would be sweet, and while you're at it go ahead and chamber it for the new .327 mag. Make me one while you're at it. Seems like you would be good for tree rats to white tails here in eastern Kantuckee.
Logged
Badnews Bob
AE-2 USN retired

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #3 on: February 18, 2008, 04:36:09 AM »
Here's a picture of the last 32H&R magnum you did Larry .Taken 3 coyote's night calling so far and just loaded up another 100 rounds for it last night sweeeeeeeett!!!!!!! shooter no recoil no report love it thanks sure like the transition on the new one. Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline EVOC ONE

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 1373
  • Gender: Male
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #4 on: February 18, 2008, 04:53:22 AM »
PHATINJUN:  That is a very nice looking rig.  I'm happy for your success.  Larry does fine work.   :)
Logged

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #5 on: February 18, 2008, 09:10:32 AM »
Here's what she looks like on date night. Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #6 on: February 18, 2008, 01:37:54 PM »
That is one nice looking setup, sounds like it shoots too.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #7 on: February 18, 2008, 04:04:47 PM »
I fit the ejector tonight, on this barrel I used a .223 ejector even though it is a rimmed cartridge, on the first 32 H&R barrel I used a modified Hornet ejector.  They both work well, on this one I had to put a lifter button in the barrel, I didn't on the hornet, but I did have to modify the Hornet ejector.  I would say use what you have on hand.  The barrel band is bored to the right size for the barrel, I still have to shape it up some, I use a belt sander.  Good luck, I would hope some young guy with a little lathe will start doing these up, I am just too old to do many of them.  Larry



Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #8 on: February 18, 2008, 04:18:41 PM »
Larry you never cease to amaze me. Thanks for sharing your projects, you are a great part of GBO. Three cheers
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline ib_crawlin

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #9 on: February 18, 2008, 05:02:43 PM »
I'm a young (er?) guy that tried to convert my versa pack 410 barrel to 32 S&W long (inspired by trotterlg's work) with my chinese mini lathe. Barrel was an ebay won 7.62x39 SKS barrel, NOS job. It actually shot pretty good but looks liked crap and has no ejector (no sights or fore-arm stud for that matter)...I cut a notch in the chamber to pick out the empty's with a screwdriver...I guess I want a 32 S&W long handi rifle with an ejector pretty bad Larry, but I'm no machinist....
I have a couple hundred rounds of 32 S&W shorts and longs loaded up along with the dies, bullet mold , etc. etc.....

Keep up the good work Larry,

Ron
Logged

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #10 on: February 23, 2008, 08:22:54 AM »
This is the finished barrel on my frame, I will try to shoot it tomorrow and ship it.  17 inches long, this will make a real nice rifle I think.  Larry

Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline Busta

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2586
  • Gender: Male
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #11 on: February 23, 2008, 11:07:28 AM »
Looks great as usual Larry!
Logged
U.S.A.F. Veteran
NRA Life Member

Offline tallyho

  • Trade Count: (52)
  • Senior Member
  • *****
  • Posts: 1301
  • Gender: Male
  • DECEASED 6/6/2013
Re: 32-20, 32-H&R Mag, 32 ACP etc.
« Reply #12 on: February 23, 2008, 11:26:58 AM »
I'm sitting here leaning back in my chair so the drooling doesn't get on my keyboard...

Great job Larry!
Logged
DECEASED 6/6/2013
Pages: [1]   Go Up
« previous next »