www.GBOReloaded.com
Home
Help
Articles
Classifieds
Login
Register
Graybeard Outdoors (GBO Reloaded)
»
Rifle and Optics Forums
»
Rimfire Rifles
»
Savage MKIIFV heavy Barrel
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Savage MKIIFV heavy Barrel (Read 1033 times)
0 Members and 1 Guest are viewing this topic.
crimsontalon
Trade Count:
(
0
)
Member
Posts: 50
Savage MKIIFV heavy Barrel
«
on:
February 22, 2008, 07:44:26 PM »
I have a Marlin 917V & I have been thinking about getting a Savage MKIIFV I was curious if the Heavy barrel on the Savage is comparable to the size of the heavy barrel on the Marlin.
Logged
Roll Tide!
rbergum95
Trade Count:
(
0
)
Contributor
Posts: 373
Gender:
Theres no luck in lead unless it's flyin'.
Re: Savage MKIIFV heavy Barrel
«
Reply #1 on:
February 23, 2008, 03:50:53 AM »
i believe the savage barrel may be a bit heavier.
ron
Logged
crimsontalon
Trade Count:
(
0
)
Member
Posts: 50
Re: Savage MKIIFV heavy Barrel
«
Reply #2 on:
February 23, 2008, 05:40:22 AM »
Thanks. I saw a picture of a pre accutrigger MKIIFV & the barrel on that thing looked huge & some of the newer ones didnt seem to be that large.I dunno maybe its the angle the picture was taken at that made the barrel look so gianormus.
Do you have a MKIIFV,& if so do you like it?
Thanks for your input.
Logged
Roll Tide!
navylawdog
Trade Count:
(
0
)
Contributor
Posts: 410
Gender:
Re: Savage MKIIFV heavy Barrel
«
Reply #3 on:
February 24, 2008, 07:07:37 AM »
I have a Savage MKII in .17M2. It isn't the bull barrel model though. I didn't even know at the time that they made a bull barrel for it until I had to go to another gun shop to buy the ammo and they had one. I found out after I got it sighted in that I didn't even need the bull barrel. At fifty yards it will put three shots in a cluster the size of a nickel with Hornady ammo. It doesn't seem to like the CCI's all that much though. I am going to get some Remington's next and see what it will do with them.
Navylawdog
Logged
rbergum95
Trade Count:
(
0
)
Contributor
Posts: 373
Gender:
Theres no luck in lead unless it's flyin'.
Re: Savage MKIIFV heavy Barrel
«
Reply #4 on:
February 24, 2008, 01:46:23 PM »
i have a mkII FVT with the williams target peep sights. it will shoot one hole groups at 50 yards with ammo it likes, i have cut cards edgewise at 25 yards with it. needless to say, ill never get rid of it.
ron
Logged
Oldtimer
Trade Count:
(
0
)
Senior Member
Posts: 1170
Re: Savage MKIIFV heavy Barrel
«
Reply #5 on:
February 25, 2008, 06:29:34 AM »
I just miked my barrel and it is .8055 at the muzzle. This is my second Savage 93 and I am pleased as can be with it.
Logged
Steelbanger
GBO Supporter
Trade Count:
(
15
)
Contributor
Posts: 379
Re: Savage MKIIFV heavy Barrel
«
Reply #6 on:
February 25, 2008, 11:06:18 AM »
A few years back I bought a Savage MK II FVT to use in my club's indoor league. First 2 sighting shots at 50 ft. went into one 22 cal hole. Got the sights adjusted to center and that rifle proved to be more accurate than many expensive rifles on the line. I bet that there are at least a dozen MK II's in the league now and all are fine shooters. The AccuTrigger is great and the only negative points are that sometimes the extractor fails to extract a fired case and the Savage stock makes this rifle very muzzle heavy. Most of the shooters fill the hollow stock with lead shot to bring the balance more to the center.
Savage has been very good at sending replacement parts at no charge.
Logged
"He who has gone, so we but cherish his memory, abides with us, more potent, nay, more present, than the living man."
Antoine de Saint-Expuéry
Steelbanger, NRA Life
Marlin - a hard habit to break.
Print
Pages: [
1
]
Go Up
« previous
next »
Graybeard Outdoors (GBO Reloaded)
»
Rifle and Optics Forums
»
Rimfire Rifles
»
Savage MKIIFV heavy Barrel