Author Topic: Duplex Loads  (Read 271 times)

0 Members and 2 Guests are viewing this topic.

Offline corbanzo

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2405
Duplex Loads
« on: April 25, 2008, 06:54:52 AM »
I was wondering how many of you had experimented with duplex loads in medium rifle calibers?  I was thinking of starting with a minimum load of RL-19 over top of two or three grains of unique and seeing what that would give me...  Would be for the -06 or .303brit.  The brit is an old one, so one I'm trying to keep pressures low, which is why duplex was an idea for it. 
"At least with a gun that big, if you miss and hit the rocks in front of him it'll stone him to death..."

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
Re: Duplex Loads
« Reply #1 on: April 25, 2008, 07:25:06 AM »
  I'm am afraid of duplex loads. I bounce my ammo around to much for that. The powder might get shaken out of position and then what would I have??

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: Duplex Loads
« Reply #2 on: April 25, 2008, 07:27:24 AM »
NO NO NO - duplex loads are a world unto their own and are in just about every case a nightmare waiting to happen , while some have had some luck in very large cased rounds like the 600 Nitro Express but without the proper data and testing gear its just a way to get hurt or worse .

Let me add this , Duplex loads were designed for large cases were a compressed load of VERY slow burning smokeless or Black powder are used and a SMALL amount of fast burning powder was used to help fire the larger charge . As the pressure of such a round can be difficult to determine it should be avoided .

Stimpylu32
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped