« previous next »
Pages: [1]   Go Down

Author Topic: interchange ejector and extractor barrels?  (Read 317 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeffery8mm

  • Trade Count: (59)
  • A Real Regular
  • ****
  • Posts: 533
interchange ejector and extractor barrels?
« on: September 13, 2008, 04:18:23 PM »
I have a 308 extractor and a 45-70 ejector.  Both of these are on NW recievers.  Can you interchange the barrels.  In other words will an extractor barrel fit on a rec. that an ejector barrel came off of and vice-versa???
Thaks
Jeff
Logged
With proper care and maintenance the human body will last a lifetime! :)

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
Re: interchange ejector and extractor barrels?
« Reply #1 on: September 13, 2008, 04:38:09 PM »
yes and no....They will fit both receivers...but every barrel must be fitted to a particular receiver
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: interchange ejector and extractor barrels?
« Reply #2 on: September 13, 2008, 04:47:07 PM »
Works fine Jeff, I've swapped em around alot, I've also converted an ejector to a factory extractor and a factory extractor to an ejector, frame doesn't make any difference.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Jeffery8mm

  • Trade Count: (59)
  • A Real Regular
  • ****
  • Posts: 533
Re: interchange ejector and extractor barrels?
« Reply #3 on: September 13, 2008, 04:59:26 PM »
I figured with them both being NW's that they didnt change recievers when they went to the extractors. But had to ask!! The rec was originally fitted witht he 308.  The 45-70 fits tight and all, but will pop open every so often.  Working on that as we speak!
Thanks
Jeff
Logged
With proper care and maintenance the human body will last a lifetime! :)
Pages: [1]   Go Up
« previous next »