Author Topic: Trouble w/ Encore - hammer won't move  (Read 536 times)

0 Members and 2 Guests are viewing this topic.

Offline North Nick

  • Trade Count: (7)
  • Member
  • *
  • Posts: 74
  • Gender: Male
Trouble w/ Encore - hammer won't move
« on: October 06, 2008, 12:48:24 AM »
Iput a bantam stock on my Encore for my daughter to use next weekend.

Now the hammer won't move. I think it us due to having to tighten the bolt in the stock

Anybody have experience with this?

Thanks,

Nick
"It is the pressure of going against the wind that makes eagles, planes, and kite soar" - Howard E. Hyden

Offline yooper77

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1746
  • Gender: Male
Re: Trouble w/ Encore - hammer won't move
« Reply #1 on: October 06, 2008, 06:09:53 AM »
Its probably the bolt being too long causing the problem.

yooper77

Offline Jwin

  • Trade Count: (1)
  • Member
  • *
  • Posts: 13
Re: Trouble w/ Encore - hammer won't move
« Reply #2 on: October 06, 2008, 06:47:52 AM »
If the stock bolt is too long, hammer won't move. I wanted a few more threads in mine, so I put in a longer bolt and this happened. Ground a few threads off and problem solved.

Offline North Nick

  • Trade Count: (7)
  • Member
  • *
  • Posts: 74
  • Gender: Male
Re: Trouble w/ Encore - hammer won't move
« Reply #3 on: October 09, 2008, 03:03:11 PM »
I put a shorter bolt in and all it well.  Apparently the Bantam stock comes with a shorter bolt.

Thanks for your help,

Nick
"It is the pressure of going against the wind that makes eagles, planes, and kite soar" - Howard E. Hyden

Offline Possumcop

  • GBO Supporter
  • Trade Count: (14)
  • Member
  • *****
  • Posts: 81
  • Gender: Male
Re: Trouble w/ Encore - hammer won't move
« Reply #4 on: October 09, 2008, 03:32:46 PM »
Happened to me also, I just added another flat washer and cured the problem.

 :o
"Be who you are, say what you think, people that matter don't care, and
people that care don't matter." -- Dr. Seuss