Author Topic: model 27 & 28 ??  (Read 1104 times)

0 Members and 1 Guest are viewing this topic.

Offline rdh

  • GBO Supporter
  • Trade Count: (1)
  • Member
  • *****
  • Posts: 77
model 27 & 28 ??
« on: September 02, 2008, 11:31:59 AM »
I have a 27-2 6" this is my favortie pistol and the one I shoot the best. My question is what is the difference between the two

Offline Broom Rider

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 256
  • Gender: Female
Re: model 27 & 28 ??
« Reply #1 on: September 02, 2008, 12:05:13 PM »
The 28 is the plain Jane no frills version of the 27.
Lynnie, NRA Life Member

Offline R Jones

  • Trade Count: (0)
  • Member
  • *
  • Posts: 41
  • Gender: Male
Re: model 27 & 28 ??
« Reply #2 on: September 02, 2008, 02:14:01 PM »
Welp! Give thet' little lady thu' prize , cause' she's right on target!!! ;D   R Jones
I remain, R Jones

Offline Cottonwood

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2780
  • Gender: Male
  • "Capturing the moment, to last a lifetime"
Re: model 27 & 28 ??
« Reply #3 on: September 02, 2008, 03:21:23 PM »
Yep she is... little known fact about the Mod 28/27 is that a hybread round was developed using these models called the .357/44 which was a necked down .44 Mag case to fit a .358 dia bullet.  They replaced the cylinder with a Mod 29 added a nylon sleave to go over the necked cartridge and gave it whopping fps.

357/44 Bain & Davis
http://www.reloadbench.com/cartridges/w35744bd.html

But it need to be either a mod 27 or the mod 28 that could be used in conjuction with the mod 29 cylinder.

Your mod 27-2 6" is a great handgun.


Offline rdh

  • GBO Supporter
  • Trade Count: (1)
  • Member
  • *****
  • Posts: 77
Re: model 27 & 28 ??
« Reply #4 on: September 02, 2008, 03:55:06 PM »
Hey thanks for answering my question

Offline CzaRon

  • Trade Count: (0)
  • Member
  • *
  • Posts: 61
Re: model 27 & 28 ??
« Reply #5 on: September 03, 2008, 12:42:13 PM »
I was led to believe that the Mod.27 had the outside finish where the Mod.28 had extra work and smoothing on the inside for the LE market. My 70's Model 28 is and always has been very smooth and "slick". Much more so that the 27's I've handled and shot.

Offline Mikey

  • GBO Supporter
  • Moderators
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Re: model 27 & 28 ??
« Reply #6 on: September 04, 2008, 05:09:40 AM »
The Model 27 is the polished and blued model.  It is the direct offspring of the first S&W 357.  It came in 3.5, 3.75, 4, 5, 6 and 8" bbls.  It was offered with target stocks, a target trigger and hammer (wide), and either a red ramp front sight or Baughman target sight with a adjustable white outline rear sight.  The Model 27 also had aestetic glare deflecting cuts on the top strap.

The Model 28 is the Highway Patrolman, which was a no frills design for police work.  It is/was a matt blued revolver in only 4 and 6" bbl length.  The Highway Patrolman was not as smooth internally as the Model 27 but could easily be smoothed right out.   The Model 28 was offered with a service trigger and hammer (narrow) and a plain front ramp and rear sight. 

I owned a 6" 28 for years and regularly carried it afield until I got tired of it wearing a hole in my hip after waling around all day.  I sent it back to S&W for a re-barrel to a 3.75 inch, which they did not have but had one 3.5 inch bbl left which they installed.  The blue of the M27 bbl did not match the matt finish of the frame and cylinder, so they blued the entire piece to match and it is bee-yoo-tea-ful, I think.  They also went over all the innards and anything that looked old or worn was replaced.  It is smoooooth.  Mikey.

Offline lester

  • Trade Count: (0)
  • Member
  • *
  • Posts: 60
Re: model 27 & 28 ??
« Reply #7 on: September 04, 2008, 02:38:20 PM »
I have a 28-2 Highway Patrolman w/ 6" barrel.  It's my woods carry gun and I love it.  VERY accurate out to 50 yards.  In fact I practice often with it at the range to prep for military pistol competitions.  In single action the trigger is smooth and very crisp.  It's nothing to "clean" a target with a 50 rd box of .38 spl.  Mine is completely stock, including the wood grips.  Bought it from a Major that used to be in my unit.  He needed some quick cash and let it go for $240 with a leather belt holster and a coup;e of boxes of shells.  His loss, my gain.

Lester
Lester

"My greatest fear is that when I die my wife will sell all my hunting and fishing gear for what I told her I paid for it"

Offline R Jones

  • Trade Count: (0)
  • Member
  • *
  • Posts: 41
  • Gender: Male
Re: model 27 & 28 ??
« Reply #8 on: September 04, 2008, 03:42:57 PM »
Lester, Pard, You stole that one!!! ;)  R Jones
I remain, R Jones

Offline dbriannelson

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 215
Re: model 27 & 28 ??
« Reply #9 on: September 08, 2008, 03:32:51 AM »
Back when I was 18 and was driving an interstate truck summers and over the Holidays, I carried a handgun with the knowledge and consent of the company (and the laissez faire attitude of Great Plains state governments - this was about 1969) - I generally carried cash payments for the loads on the return trips.  Because the gun would spend its life under the seat or in a gym bag I didn't want something that would make me cry if it got scratched up.  That four-inch Highway Patrolman was the first centerfire revolver I ever bought brand new.  It was a bit of vanity, as I had a perfectly good 1928 Argentine .45 Auto that could have continued to do the job just fine.

One night just after midnight in the warehouse district of one of the largest cities on the Mississippi I was in the trailer sorting it out after unloading and paying off the labor.  A presumed bad man climbed in the back and started approaching me.  He was carrying something that I thought was a knife, but could have been a tire iron, or for that matter, almost anything.  It was dark.  He didn't respond to my squeeky 18-year-old voice when I demanded he get off the truck. 

My gym bag was there with $2400 (I remember that figure very well, as it was the largest sum I'd ever carried) and the Highway Patrolman.  I reached in, removed the revolver, fired one round double-action into the warehouse wall out the door and over his shoulder (it was real dark, so it wasn't as much aiming as pointing), and he decided to leave.  Quickly.

I stuck around for an hour waiting for the police to come arrest me for something, but after that hour buttoned it up and drove until I was two states away.

A year or so later I traded the Model 28 against a Model 19.  Wish I hadn't - never liked the Combat Magnum anywhere near as much.  But it was lighter.

Sorry about going off-topic, but the Highway Patrolman carries a lot of nostalgia for me.

-Don
Semper Fi.  (1803/0210)

Offline S.B.

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3953
  • Gender: Male
Re: model 27 & 28 ??
« Reply #10 on: October 14, 2008, 03:39:58 PM »
Yep she is... little known fact about the Mod 28/27 is that a hybread round was developed using these models called the .357/44 which was a necked down .44 Mag case to fit a .358 dia bullet.  They replaced the cylinder with a Mod 29 added a nylon sleave to go over the necked cartridge and gave it whopping fps.

357/44 Bain & Davis
http://www.reloadbench.com/cartridges/w35744bd.html

But it need to be either a mod 27 or the mod 28 that could be used in conjuction with the mod 29 cylinder.

Your mod 27-2 6" is a great handgun.



I don't remember that nylon sleave thing happening but, can remember gunsmiths reaming the .357 cylinders. End result was not enough balistic improvement to make it worth the effort, bottle necked handgun cases tend to back up onto the recoil shield and lock the action up.
Steve
"The Original Point and Click Interface was a Smith & Wesson."
Life member of NRA, USPSA,ISRA
AF&AM #294
LIUNA #996 for the past 34 years/now retired!