« previous next »
Pages: [1]   Go Down

Author Topic: 500 S&W 500 gr. Hornady  (Read 682 times)

0 Members and 1 Guest are viewing this topic.

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
500 S&W 500 gr. Hornady
« on: October 17, 2008, 07:24:48 AM »
Has anyone tried the 500 grain hornady's???
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 500 S&W 500 gr. Hornady
« Reply #1 on: October 17, 2008, 07:36:04 AM »
John Taffin reported a velocity of 1546fps and 5/8" group at 25yds.

Tim

http://findarticles.com/p/articles/mi_m0BQY/is_1_53/ai_n16866654/pg_4?tag=artBody;col1
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
Re: 500 S&W 500 gr. Hornady
« Reply #2 on: October 17, 2008, 07:44:23 AM »
I'm also looking at some of 600 or 700 grain hardcast... Maybe I just feel like some punishment this year....
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 500 S&W 500 gr. Hornady
« Reply #3 on: October 17, 2008, 07:52:01 AM »
I get 1430fps with a max load of Lil'gun under the 700gr Ranger Ricks, goes thru paper at 100yds with no problems!! ::) ;D Someday I'd like to do some penetration tests.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
Re: 500 S&W 500 gr. Hornady
« Reply #4 on: October 17, 2008, 07:55:01 AM »
I'm afraid of what the shooter might feel lol...
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 500 S&W 500 gr. Hornady
« Reply #5 on: October 17, 2008, 08:01:57 AM »
It's not a problem on a Leadsled which I had for shooting those!! 8) But with weight in the stock, a Limbsaver on the stock, and a Past Magnum shoulder pad on me, they'd be tolerable from the bench, that's what I used before the Leadsled. ;)

Tim

700gr RR and 440gr Cast Performance.
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline dpe.ahoy

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 3363
  • Gender: Male
Re: 500 S&W 500 gr. Hornady
« Reply #6 on: October 17, 2008, 08:28:05 AM »
700 g.!?  That should move the balance of the rifle back to the chamber! :D  DP
Logged
RIP Oct 27, 2017

Handi's:22Shot, 22LR, 2-22Mag, 22Hornet, 5-223, 2-357Max, 44 mag, 2-45LC, 7-30 Waters, 7mm-08, 280, 25-06, 30-30, 30-30AI, 444Marlin, 45-70, AND 2-38-55s, 158 Topper 22 Hornet/20ga. combo;  Levers-Marlins:Two 357's, 44 mag, 4-30-30s, RC-Glenfields 36G-30A & XLR, 3-35 Rem, M-375, 2-444P's, 444SS, 308 MX, 338Marlin MXLR, 38-55 CB, 45-70 GS, XS7 22-250 and 7mm08;  BLR's:7mm08, 358Win;  Rossi: 3-357mag, 44mag, 2-454 Casull; Winchesters: 7-30 Waters, 45Colt Trapper; Bolt actions, too many;  22's, way too many.  Who says it's an addiction?

Offline tykempster

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 798
  • I enjoy long range shooting and big guns.
Re: 500 S&W 500 gr. Hornady
« Reply #7 on: October 18, 2008, 04:21:23 PM »
How do you think recoil is compared to your 45-120 blackpowder loads?
Logged

Offline mattt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 63
Re: 500 S&W 500 gr. Hornady
« Reply #8 on: October 18, 2008, 05:13:13 PM »
In a rifle the hornady 500gn should not be a problem as I shoot them in my sw 500 mag revolver alot. The rounds that hurt me are the buffalo bore. I shot a couple of those 700 grn loads out of my 500 mag and would not advise it in a revolver.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 500 S&W 500 gr. Hornady
« Reply #9 on: October 18, 2008, 06:07:00 PM »
In an 8lb rifle, using 29gr of powder under the 700gr RR @ 1430fps, recoil is 49.42lbs. The Buffalo Bore 440gr @ 1625fps would produce 28.96lbs recoil using a 35gr max load of Lil'gun.

Tim

http://www.handloads.com/calc/recoil.asp

http://www.chuckhawks.com/recoil_table.htm
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline mattt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 63
Re: 500 S&W 500 gr. Hornady
« Reply #10 on: October 19, 2008, 04:08:27 AM »
The buffalo bore hurt my arm after a few shots but it was shootable but the 700gr loads my friend made had such a violent kick I will never try  them again unless a rhino was chasing me down a dead end alley with no other choice but to shoot on of those out of my 500 revolver .How do those 700gr loads compare to a hot 4570 load if both were fired out of a handi?
Logged

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
Re: 500 S&W 500 gr. Hornady
« Reply #11 on: October 19, 2008, 04:34:18 AM »
I have shot the 350gr hornady's and I found them to have a violent recoil... This isn't a target gun...
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 500 S&W 500 gr. Hornady
« Reply #12 on: October 19, 2008, 04:55:35 AM »
Quote from: mattt on October 19, 2008, 04:08:27 AM
How do those 700gr loads compare to a hot 4570 load if both were fired out of a handi?

A 300gr Nosler Partition @ 2425fps in the same 8lb rifle has 35.86lbs recoil. I have some .458" 720gr RR bullets, but haven't shot them yet, but I sent some to Tykempster to test in his 45-120NE Buffalo Classic, they provide about 120lbs recoil at 2000fps.  :o

Tim

http://www.gboreloaded.com/forums/index.php/topic,151146.msg1098635879.html#msg1098635879
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: 500 S&W 500 gr. Hornady
« Reply #13 on: October 19, 2008, 11:50:51 AM »
This was THE bullet I wanted to shoot form the 500. I couldn't find a load that was accurate enough for me. I was hoping for consistent 2" groups @ 100yrds. I used all the applicable powders. i had a couple come close, but no cigar. I shot them font mid 1400's up to almost 1800fps. Recoil was manageable.

Tim recommended Ranger Ricks line of cast bullets, BINGO!!  The 440gr WFN GC is shooting GREAT!!

 I want to begin experimenting with Rem's 385gr .500 bullet. Its price is VERY attractive, as long as I can find a good load.... ::)

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.
Pages: [1]   Go Up
« previous next »