« previous next »
Pages: [1]   Go Down

Author Topic: removing permanant front site  (Read 735 times)

0 Members and 1 Guest are viewing this topic.

Offline manofthe45

  • Trade Count: (36)
  • A Real Regular
  • ****
  • Posts: 834
  • Gender: Male
  • Bucks Hang On The Wall. Does Fill The Freezer
removing permanant front site
« on: November 01, 2008, 11:18:47 AM »
I bought a 10" bull in 223 with front site and weaver base  it is older and I can see no way to remove the front site.  it appears either epoxied or welded on  any ideas on getting it off
Logged
NRA Member

Offline smong2000

  • Trade Count: (45)
  • Contributor
  • ***
  • Posts: 376
Re: removing permanant front site
« Reply #1 on: November 01, 2008, 11:48:05 AM »
I have an old T/C muzzloader and encountered a similar problem.  Had to drive the blade out of the dovetail to expose the screw, not sure but might be trick...Steve
Logged

Offline manofthe45

  • Trade Count: (36)
  • A Real Regular
  • ****
  • Posts: 834
  • Gender: Male
  • Bucks Hang On The Wall. Does Fill The Freezer
Re: removing permanant front site
« Reply #2 on: November 01, 2008, 04:59:59 PM »
front site is one solid piece and only about 1/4" wide with no visible dovetail for it to fit into
Logged
NRA Member

Offline Tony G

  • Trade Count: (1)
  • Member
  • *
  • Posts: 22
Re: removing permanant front site
« Reply #3 on: November 01, 2008, 06:14:03 PM »
I would call or e-mail T/C on Monday and ask them. They have been good at answering my questions. My T/C front sights could and have long since been removed.

Tony G
www.TonysForendsandStocks.com
Logged

Offline Keith L

  • Moderator
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 3781
Re: removing permanant front site
« Reply #4 on: November 01, 2008, 08:43:57 PM »
I have a couple of the old ones, and if you look at the barrel from the business end you will see a flat is machined on the top of the barrel for the sight.  I don't know how the sight is attached.  I did hear they are silver soldered in place.  If removed they leave a flat spot on the barrel that I would think is unsightly, so I just left them on.  I don't see the sight in the scope.
Logged
"Beer is proof that God loves us and wants us to be happy."  Benjamin Franklin

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
Re: removing permanant front site
« Reply #5 on: November 02, 2008, 02:51:09 AM »
Yep they're silver soldered and Keith's right on the flat spot.  I saw one for sale at a gun show recently that had been removed....wasn't pretty.  GOOD SHOOTIN',  Walt  :)
Logged

Offline wallask

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
Re: removing permanant front site
« Reply #6 on: November 12, 2008, 03:07:57 AM »
The front sight is silver-soldered on to the barrel. I removed them by CAREFULLY heating with a propoane torch until the sight fell off. You do not want to overheat and damage the barrel. The bluing on the barrel might have to be touched up. I did this many years ago playing around with different front sight blade widths and heights. I still have a couple of front sights in my junk box.
Logged

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
Re: removing permanant front site
« Reply #7 on: November 13, 2008, 09:26:45 AM »
Good info above.  Silver soldered is correct.  I leave mine in place.  I have had scopes from Lobos and 2x on up.  Never had a problem leaving the sight in place.  Did have one sight that tried to hang up on stuff once in a while.  A sight hood off a winchester snapped on nicely and didn't bother the view from the scope either.

Good Luck,

Steve :)
Logged
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002
Pages: [1]   Go Up
« previous next »