« previous next »
Pages: [1]   Go Down

Author Topic: What's your accurate Encore 209x50 load?  (Read 2362 times)

0 Members and 1 Guest are viewing this topic.

Offline teddy12b

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3078
What's your accurate Encore 209x50 load?
« on: September 09, 2008, 10:01:11 AM »
I'm still very new to muzzleloading and last year I settled in on two 50gr pyrodex pellets and a 295gr powerbelt. 

I've got some different weight sabots and powerbelts.  I've also got some pyrodex & triple seven pellets.  I'm assuming that I'm going to have to clean after each shot to get any kind of good accuracy test.

If you guys have any suggestions for a good hunting load for a encore 209x50 please let me know.  Last years load was fine, but if there's something better I want to get a head start on it for this year.
Logged

Offline tn_junk

  • GBO Supporter
  • Trade Count: (54)
  • A Real Regular
  • *****
  • Posts: 885
  • Gender: Male
  • Look to Him
Re: What's your accurate Encore 209x50 load?
« Reply #1 on: September 09, 2008, 01:17:16 PM »
Mine would shoot sub MOA with 120 grains of Pyrodex RS and a 230 grain .431 bullet in a sabot.
Wouldn't shoot ANYTHING else worth a dern.

alan
Logged
Common Sense Ain't Very Common

Deceased May 20, 2009.  RIP Alan we miss you.

Offline Tn Jim

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 714
  • Gender: Male
Re: What's your accurate Encore 209x50 load?
« Reply #2 on: September 09, 2008, 03:06:04 PM »
100 grains loose ffg 777, Remington Kleenbore primer and a 250 grain Shockwave. Three shots touching at 100 yards off a bench.
Logged
Not all Muslims are terrorist, but oddly enough, all terrorist are Muslims.

Offline c1c9

  • Trade Count: (0)
  • Member
  • *
  • Posts: 5
Re: What's your accurate Encore 209x50 load?
« Reply #3 on: October 25, 2008, 05:03:10 PM »
250gr TC Super Glide Shock Wave Bullet
110gr Black Mag 3
Winchester 209 Black Power Primer
Logged

Offline poncaguy

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2751
  • Gender: Male
Re: What's your accurate Encore 209x50 load?
« Reply #4 on: October 26, 2008, 04:10:46 AM »
120 grains Blackhorn, 250 Shockwave............1/2" groups ( 2 shots)
Logged

Offline billy

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 407
Re: What's your accurate Encore 209x50 load?
« Reply #5 on: October 26, 2008, 01:59:55 PM »
105 grains of blackhorn and 300 grain superglide shockwave.
Logged
I enjoy collecting guns, swaping and staying up on all the newest models. I deer, quail, squirrel and rabbit hunt.

Offline GRIMJIM

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 3002
  • Gender: Male
Re: What's your accurate Encore 209x50 load?
« Reply #6 on: October 26, 2008, 02:24:51 PM »
2 triple seven pellets and a 240 grain xtp
Logged
GBO SENIOR MEMBER "IF THAT BALL COMES IN MY YARD I'M KEEPING IT!"

NRA LIFE MEMBER

UNION STEWARD CARPENTERS LOCAL 1027

IF GOD DIDN'T WANT US TO EAT ANIMALS, WHY DID HE MAKE THEM OUT OF MEAT?

Offline rks1949

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 311
Re: What's your accurate Encore 209x50 load?
« Reply #7 on: November 08, 2008, 03:31:13 AM »
 3- 50gr. Pyrodex pellets,and a 250gr. SW bullet,any brand primer. I use a Nikon BDC scope,and the combination works spot on,out to 250 yds. The gun will also shoot well with 100grs. (volume measured) of ffgT7,with the same bullet,but the trajectory dosen't match up,with the scope. So if I'm hunting the deep woods,the 100gr. load will work well (no shots over 100yds) and if I'm hunting the edge (big bean/corn) fields I use the 3 pellet load for the extra range. Ron
Logged
UNCOMPENSATED ENDORSER

Offline alsaqr

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1270
Re: What's your accurate Encore 209x50 load?
« Reply #8 on: November 11, 2008, 01:26:02 AM »
The 200 grain Shockwave with 110 grains of Pinnacle 2F and a Winchester shotgun primer. 
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: What's your accurate Encore 209x50 load?
« Reply #9 on: November 11, 2008, 01:33:41 AM »
120 gr. of loose triple 7 and 250 gr. T/C bonded shockwave bullets.
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline 12ptdroptine

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 308
Re: What's your accurate Encore 209x50 load?
« Reply #10 on: November 11, 2008, 03:00:50 PM »
100gr T7 FFG 250gr sst in a black sabot...3 holes touching @ 100 yds off a bench
Logged

Offline slave

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 287
  • Gender: Male
Re: What's your accurate Encore 209x50 load?
« Reply #11 on: November 16, 2008, 10:18:46 AM »
112gr of fffg 7 & 250gr shock wave bonded / ez glide.
Logged
keep your powder dry !!!

Offline WARPhEAGLE

  • Trade Count: (0)
  • Member
  • *
  • Posts: 36
Re: What's your accurate Encore 209x50 load?
« Reply #12 on: November 28, 2008, 01:25:31 AM »
100 gr Blackhorn 209 with Barnes 250gr Spitfire TMZ.
Logged

Offline Two Bears

  • Trade Count: (10)
  • A Real Regular
  • ****
  • Posts: 537
Re: What's your accurate Encore 209x50 load?
« Reply #13 on: November 30, 2008, 01:57:28 AM »
85 grains of Goex FFFG and a Hornady XTP 300 grain bullet with a Harvester sabot.

Real black powder shoots great and it is very cheap to purchase.
Logged
HAVING A LIBERAL ALONG IS LIKE LOSING 2 GOOD MEN

Offline hawken_cougar

  • Trade Count: (15)
  • Member
  • *
  • Posts: 84
  • Gender: Male
Re: What's your accurate Encore 209x50 load?
« Reply #14 on: December 03, 2008, 06:12:58 AM »
90 grains ffg trip7, powerbelt 295 grain hp, win trip7primer...1" group at 100yds
Logged
Pages: [1]   Go Up
« previous next »