Author Topic: Lyman Cougar  (Read 1425 times)

0 Members and 2 Guests are viewing this topic.

Offline john keyes

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 770
Lyman Cougar
« on: December 27, 2008, 10:21:06 AM »
are they any good, looks like this place has a bunch for $150

I can find hardly any old info on the net.

about the only thing I found said they were a nightmare to clean...

Though taken from established manufacturers' sources and presumed to be safe please do not use any load that I have posted. Please reference Hogdon, Lyman, Speer and others as a source of data for your own use.

Offline Busta

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2586
  • Gender: Male
Re: Lyman Cougar
« Reply #1 on: December 27, 2008, 11:08:18 AM »
No personal experience with them, but here is some info. I think they are made by Investarms in Italy. You also might want to find out if these are .50 cal or .54 cal. Not to try and deter you, but if you look around you can get some new old stock Knights and T/C's for the same or less money.

Scroll down to Lyman Cougar.
http://www.hunting-fishing-gear.com/results-reader-reviews/Black%20Powder
U.S.A.F. Veteran
NRA Life Member

Offline john keyes

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 770
Re: Lyman Cougar
« Reply #2 on: December 27, 2008, 11:16:41 AM »
I found somebody on MML saying that you have to fill the hollow stock (that doesn't sound good...LOL) because the edges will jab into your shoulder.... ;D

I hear ya Busta, I'm thinking late Jan or so there will be some killer deals popping up.
Though taken from established manufacturers' sources and presumed to be safe please do not use any load that I have posted. Please reference Hogdon, Lyman, Speer and others as a source of data for your own use.

Offline Buckskins & Black Powder

  • Moderator
  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1700
  • Gender: Male
    • Buckskins & Black Powder
Re: Lyman Cougar
« Reply #3 on: December 27, 2008, 04:01:23 PM »
deer creek sells these for $140+ s/h.  Their cateloge has it pictured with a scope and mounts.

Offline mcgiiver

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 119
Re: Lyman Cougar
« Reply #4 on: December 28, 2008, 09:43:35 AM »
I have one and love it. I read the review about the cleaning. Its quite simple to clean as the bolt removes from the rear. Wrench removes breech plug and then clean thru breech. No harder that any other ML of this type. Mine shoots very well. I find it lacks for nothing in quality. At $149 this is a bargain. Very simple design nothing much to go wrong. I find nothing digs into my shoulder as the gun comes with a nice recoil pad. I believe it comes with scope bases. I would say go for it.

Offline john keyes

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 770
Re: Lyman Cougar
« Reply #5 on: December 28, 2008, 11:46:39 AM »
I have one and love it. I read the review about the cleaning. Its quite simple to clean as the bolt removes from the rear. Wrench removes breech plug and then clean thru breech. No harder that any other ML of this type. Mine shoots very well. I find it lacks for nothing in quality. At $149 this is a bargain. Very simple design nothing much to go wrong. I find nothing digs into my shoulder as the gun comes with a nice recoil pad. I believe it comes with scope bases. I would say go for it.
hey thanks, are they 209 or caps?

thanks
Though taken from established manufacturers' sources and presumed to be safe please do not use any load that I have posted. Please reference Hogdon, Lyman, Speer and others as a source of data for your own use.

Offline mcgiiver

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 119
Re: Lyman Cougar
« Reply #6 on: January 04, 2009, 03:21:23 PM »
They are #11 cap rifles. However, there is room on the striker face for you to change the nipple to a musket cap nipple, and fire them. I personally have never had any trouble with the #11 caps.