« previous next »
Pages: [1]   Go Down

Author Topic: Help? Where to buy implements for 2 1/4 bore.  (Read 1216 times)

0 Members and 1 Guest are viewing this topic.

Offline russellwallace

  • Trade Count: (0)
  • Posts: 4
Help? Where to buy implements for 2 1/4 bore.
« on: January 26, 2009, 04:00:44 AM »
I recently purchased a two thirds scale six pounder from Hern Ironworks. I'm very pleased to come across this forum since I will be a beginning artilleryman.
I have been unable to locate a source for my 2 1/4 bore swab, ramrod, worm etc.
Can someone help.

Thank you,

Russell
Logged

Offline Ex 49'er

  • GBO Supporter
  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 1975
  • Gender: Male
Re: Help? Where to buy implements for 2 1/4 bore.
« Reply #1 on: January 26, 2009, 05:23:41 AM »
Hi Russel,
Try contacting Dom Carpenter for your implements: http://www.blackpowder-cannons.com/
He is one of the sponsors here and he does amazing work.
Logged
When you're walking on eggs; don't hop!!

Offline BoomLover

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1152
  • Gender: Male
Re: Help? Where to buy implements for 2 1/4 bore.
« Reply #2 on: January 26, 2009, 07:23:51 PM »
Welcome to the forum, Russel! I ended up making my own implements for my 2.25 bore. It really isn't too hard, lots of fun, and a good learning experience. Check out the "how to" sections, and read up. That will help, plus, you'll get lots of ideas and help from these guys. Great bunch of guys! BoomLover
Logged
"Beware the Enemy With-in, for these are perilous times! Those who promise to protect and defend our Constitution, but do neither, should be evicted from public office in disgrace!

Offline Evil Dog

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 651
  • Gender: Male
Re: Help? Where to buy implements for 2 1/4 bore.
« Reply #3 on: January 27, 2009, 05:26:56 AM »
Hey Russell... For the sponges I ended up using some of that dark grey foam stuff that is made for insulating pipes.  Just glued a section of it over a 1" dowel and then covered it with an old sock.  Cheap to make and worked out well.
Logged
Evil Dog

Democracy is two wolves and a lamb voting on what to have for lunch.
Freedom is a well-armed lamb contesting that vote. - Benjamin Franklin (1759)

Offline RocklockI

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2747
  • Gender: Male
  • Morko and Me
Re: Help? Where to buy implements for 2 1/4 bore.
« Reply #4 on: January 27, 2009, 06:26:51 AM »
I thought Hern sold a few implements . Other than that I'd talk to Dom .
Logged
"I've seen too much not to stay in touch , With a world full of love and luck, I got a big suspicion 'bout ammunition I never forget to duck" J.B.

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Help? Where to buy implements for 2 1/4 bore.
« Reply #5 on: January 27, 2009, 07:04:07 AM »
Quote from: russellwallace on January 26, 2009, 04:00:44 AM
I recently purchased a two thirds scale six pounder from Hern Ironworks. I'm very pleased to come across this forum since I will be a beginning artilleryman.
I have been unable to locate a source for my 2 1/4 bore swab, ramrod, worm etc.
Can someone help.

Thank you,

Russell

Did you contact our sponsors?
Logged

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Re: Help? Where to buy implements for 2 1/4 bore.
« Reply #6 on: January 27, 2009, 02:27:43 PM »
Russell --

WELCOME to the board!

We're lookin' forward to seeing pix of smoke and fire!

Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline BoomLover

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1152
  • Gender: Male
Re: Help? Where to buy implements for 2 1/4 bore.
« Reply #7 on: January 29, 2009, 06:55:53 PM »
Hi again, Russell...just a short addition to your questions about your 2.25 bore...have heard that pooltable balls are a pretty good fit for projectiles, same with 2 lb "cannon ball" fishing weights. Be safe but have fun shooting! BoomLover
Logged
"Beware the Enemy With-in, for these are perilous times! Those who promise to protect and defend our Constitution, but do neither, should be evicted from public office in disgrace!

Offline Rickk

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1391
    • http://www.lioby.com
Re: Help? Where to buy implements for 2 1/4 bore.
« Reply #8 on: January 30, 2009, 02:07:31 AM »
These are my "implements" for both my Hern 2.25" guns



The worm head is sold by Dixie Gun Works, and the swabs are home made using wooden dowels and synthetic sheep's wool. If you want to know how to make them, I will dig up a link to the details.

Rick
Logged
Pages: [1]   Go Up
« previous next »