« previous next »
Pages: [1]   Go Down

Author Topic: standard contour barrel  (Read 300 times)

0 Members and 1 Guest are viewing this topic.

Offline moosemoose

  • Trade Count: (9)
  • Member
  • *
  • Posts: 39
  • Gender: Male
standard contour barrel
« on: February 26, 2009, 01:23:05 AM »
I may have overlooked this in the FAQ... I'm easily distracted as I read, there is so much info.  I would like to know the diameter at the muzzle of a standard contour barrel, and a bull barrel.  Thanks in advance!  What a great site!!!
Logged
When you are right you've stopped learning.

Offline moosemoose

  • Trade Count: (9)
  • Member
  • *
  • Posts: 39
  • Gender: Male
Re: standard contour barrel
« Reply #1 on: February 27, 2009, 02:54:56 AM »
to the top
Logged
When you are right you've stopped learning.

Offline OR-E-Gun Bill

  • GBO Supporter
  • Trade Count: (18)
  • A Real Regular
  • *****
  • Posts: 907
  • Gender: Male
Re: standard contour barrel
« Reply #2 on: February 27, 2009, 03:25:59 AM »
When you use the  Control F keys, enter the word "muzzzle diameters" and it will take you to the info you are looking for.

Looks like an extra z snuck in there. ;)

Bill

Welcome to GBO-Handiland
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43302
  • Gender: Male
Re: standard contour barrel
« Reply #3 on: February 27, 2009, 05:46:21 AM »
Not any more, I fixed it, thanks Bill!!  ;D

Tim

Standard barrel muzzle diameters range any where from .640" to .750", depending on length and chambering, bull barrels are ~.800" at the muzzle, 357 is ~.740", and the big bores are even bigger, up to ~.890" for the .500 S&W. My 243 Superlight is .637" and the 30-30 is .642", not a lot of difference for some barrels. Marv's superlight is .595" IIRC. The 26" barrels are also a bit smaller than the shorter standard barrels at around .650".
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »