« previous next »
Pages: [1]   Go Down

Author Topic: Cast Bullets in 629 ported  (Read 866 times)

0 Members and 2 Guests are viewing this topic.

Offline RangerRiz

  • Trade Count: (10)
  • Member
  • *
  • Posts: 93
  • Gender: Male
Cast Bullets in 629 ported
« on: February 10, 2009, 04:00:09 PM »
I have just come to own an 629 classic ported, and I am considering getting into bullet casting.  I just wanted to know if anyone has had any problems shooting cast bullets in guns with porting.
Logged
God did not create all men equal, Colt did!
ROLL TIDE!
Tolerance is the virtue of a man without convictions

Offline bulletstuffer

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 694
  • Gender: Male
  • Overkill begins when hair shoots out the antlers.
Re: Cast Bullets in 629 ported
« Reply #1 on: February 11, 2009, 05:07:59 PM »
Are the ports cut out of the top of the barrel or one slot cut on each side of the top centerline?
Logged
I am the first to work when I have to and the first to go on vacation when I can!  God Bless America!!!

Offline RangerRiz

  • Trade Count: (10)
  • Member
  • *
  • Posts: 93
  • Gender: Male
Re: Cast Bullets in 629 ported
« Reply #2 on: February 14, 2009, 02:43:48 PM »
It is factory ported with one oblong port above an expantion chamber at the end of the barrel.
Logged
God did not create all men equal, Colt did!
ROLL TIDE!
Tolerance is the virtue of a man without convictions

Offline dbriannelson

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 215
Re: Cast Bullets in 629 ported
« Reply #3 on: February 14, 2009, 03:36:05 PM »
Given that I have no experience at all with ported barrels, I'll nonetheless venture an opinion. 

No problem.  If there were a problem, S&W would not have done it.  Must be at least half of all .44s are shot with cast bullets anyway.

Just keep the bore clean - that's not an easy thing.  You might want to take a close look at your bore before doing any shooting and think about hot-lapping it.  Maybe reaming the throats.  Somewhere below I wrote a long sad story about the nasty factory bore of a Model 21 .44 Special and all the trouble I had with leading, and how I fixed it.

-Don 
Logged
Semper Fi.  (1803/0210)

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: Cast Bullets in 629 ported
« Reply #4 on: February 15, 2009, 02:22:48 AM »
All I shoot in my handguns are cast bullets. I have a S&W light hunter in 44 Mag with the ported barrel.  The only gun I know of an issue with, is the S&W 460 and 500 Mag's with the interchangeable compensator's. You just have to make sure you have the one for lead bullets in when shooting lead bullets.

Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Broom Rider

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 256
  • Gender: Female
Re: Cast Bullets in 629 ported
« Reply #5 on: February 25, 2009, 01:54:38 PM »
I have a couple 629's that are the power port models. When using lead bullets I get a small amount of lead vapor build up on the front and forward sides of the front sight and any lead build up in the port seems to go away with a little shooting of jacketed ammo.
I don't get very OCD over lead in the port anyway but I try to keep the front sight reasonably clean.
Magnaporting leaves lead build up on the sides of the barrel quickly when using lead bullets and it doesn't clean up as easily.
Logged
Lynnie, NRA Life Member

Offline jro45

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1923
Re: Cast Bullets in 629 ported
« Reply #6 on: February 26, 2009, 07:19:46 AM »
The only revolver I've shot Lead in is my S&W 500 and didn't have any problems.
Logged

Offline efremtags

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 358
Re: Cast Bullets in 629 ported
« Reply #7 on: February 26, 2009, 03:29:36 PM »
good hardcast will not be an issue if you clean after you shoot before the lead has time to get to hard. Also, use a gas check if you shoot loads over 1100FPS.
Logged
Pages: [1]   Go Up
« previous next »