Author Topic: cannon ball mold?  (Read 623 times)

0 Members and 1 Guest are viewing this topic.

Offline halfarod

  • Trade Count: (0)
  • Member
  • *
  • Posts: 13
  • Gender: Male
cannon ball mold?
« on: April 06, 2009, 12:42:50 PM »
anyone know if they make like a 2.5" sinker mold or where could i get the big of a mold?

Offline DoktorD

  • Trade Count: (0)
  • Member
  • *
  • Posts: 56
  • Gender: Male
  • Night Firing ;)
Re: cannon ball mold?
« Reply #1 on: April 06, 2009, 01:50:26 PM »
Heres a site in the cannon related links at the top of the forum...

http://www.jt-bullet-moulds.co.uk/

Hope it helps,

Mat
When cannons are outlawed, only outlaws will have cannons.

"Historic Artillery Archival Photograph Identification Specialist Extraordinaire"

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: cannon ball mold?
« Reply #2 on: April 06, 2009, 01:57:19 PM »
Check with out board sponsor and see what they can do for you.    I believe GBO Sponsor Ed Hart AKA Armorer77 said he makes moulds.  Look in the GBO Sponsor sticky at the top of the board for Ed's contact info.

Offline dynomike

  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 62
Re: cannon ball mold?
« Reply #3 on: April 07, 2009, 10:52:15 AM »
That look like a good price for a jt-bullet brass mold. Can you pour zinc in a brass mold? If you get one of those molds let us know how it works.

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: cannon ball mold?
« Reply #4 on: April 07, 2009, 12:01:31 PM »
Can you pour zinc in a brass mold?

I would think that would be OK as the melting points are much farther apart than zinc and aluminum.  However, I don't know whether there would be a problem of the zinc wetting the brass and not coming out.  You might have to smoke the cavity before using it.

Here is a discourse on casting in brass moulds.
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”
--Winston Churchill