« previous next »
Pages: [1]   Go Down

Author Topic: tc qla  (Read 972 times)

0 Members and 1 Guest are viewing this topic.

Offline forcon

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
tc qla
« on: June 02, 2009, 04:36:39 AM »
I just ordered a new barrel for my 54 cal Renegade the other day and then I realized it will come with the qla.I remember reading quite a few negative comments on this feature and I would like to hear some real world opinions.The barrel I ordered is the 26" 1-48 twist.I plan on shooting 90% round ball out of it but would also like to try some conicals. I would have ordered the 1-66 twist but that comes in a 30" inch barrel and since I allready have a gpr I don't want a duplicate.I plan on doing a lot more still hunting this year so I thought a shorter gun would be a little Handier in the thick stuff. Any advice would be greatly appreciated.Forcon
Logged

Offline Buckskins & Black Powder

  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1700
  • Gender: Male
    • Buckskins & Black Powder
Re: tc qla
« Reply #1 on: June 02, 2009, 05:30:43 AM »
you could have ordered it without the qla, you just had to request it to the shop.
Logged

Offline forcon

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Re: tc qla
« Reply #2 on: June 02, 2009, 08:26:33 AM »
Hey BB, I called today and asked if I could get a barrel without qla-the lady said they all come that way from the shop but she said she would contact someone to see if that would be possible,hope so. Thanks.
Logged

Offline Forestclimber

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 706
Re: tc qla
« Reply #3 on: June 02, 2009, 10:30:37 AM »
I had a QLA barrel that I shot 300 grain XTP saboted bullets out of.  It shot well.  I never tried roundballs.
Logged

Offline GRIMJIM

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 3002
  • Gender: Male
Re: tc qla
« Reply #4 on: June 02, 2009, 12:06:38 PM »
Mine has a qla and shoots great. I seem to remember some people got barrels that had the qla machined crooked. If you don't want it though, hopefully they will accommodate you.
Logged
GBO SENIOR MEMBER "IF THAT BALL COMES IN MY YARD I'M KEEPING IT!"

NRA LIFE MEMBER

UNION STEWARD CARPENTERS LOCAL 1027

IF GOD DIDN'T WANT US TO EAT ANIMALS, WHY DID HE MAKE THEM OUT OF MEAT?

Offline coyotejoe

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 2937
  • Gender: Male
Re: tc qla
« Reply #5 on: June 03, 2009, 04:57:31 AM »
I had a T/C Pennsylvania Hunter .50 caliber with the QLA and had no complaints with it. I shot only patched roundballs. I like to cut my patches at the muzzle and found I had to keep my patch knife very sharp and take it easy to avoid pulling the ball back up while cutting the patch but it was not a major issue.
Logged
The story of David & Goliath only demonstrates the superiority of ballistic projectiles over hand weapons, poor old Goliath never had a chance.

Offline forcon

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Re: tc qla
« Reply #6 on: June 03, 2009, 05:21:06 AM »
Problem solved. The nice folks at T.C. called today and said they could make a barrel without qla.It"ll be 3-4 months before I recieve it,but I should have plenty of time to get it dialed in.Thanks for all the responses.FORCON!
Logged

Offline Buckskins & Black Powder

  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1700
  • Gender: Male
    • Buckskins & Black Powder
Re: tc qla
« Reply #7 on: June 03, 2009, 06:22:33 AM »
thats great news!  Im sure you'll be much happier without the qla.
Logged

Offline OB One

  • Trade Count: (0)
  • Member
  • *
  • Posts: 28
  • Gender: Male
Re: tc qla
« Reply #8 on: June 04, 2009, 03:52:53 AM »
OK I'm a newby.  Whats a QLA ?

OB
Logged
Retired Navy Chief. Predator hunter in training.

Offline GRIMJIM

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 3002
  • Gender: Male
Re: tc qla
« Reply #9 on: June 04, 2009, 04:29:32 AM »
It's an unrifled section at the muzzle that's a little oversized to align a bullet in a plastic sabot with the rifling. So it goes in straight when you push it in with the ramrod.

Some people were getting barrels where the qla was machined crooked and they were having accuracy issues.
Logged
GBO SENIOR MEMBER "IF THAT BALL COMES IN MY YARD I'M KEEPING IT!"

NRA LIFE MEMBER

UNION STEWARD CARPENTERS LOCAL 1027

IF GOD DIDN'T WANT US TO EAT ANIMALS, WHY DID HE MAKE THEM OUT OF MEAT?

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: tc qla
« Reply #10 on: June 04, 2009, 10:32:06 AM »
TC has a detailed explanation on the QLA in their FAQs.

Tim

http://www.tcarms.com/customerService/faq.php#a13
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »