« previous next »
Pages: [1]   Go Down

Author Topic: Looking for 30-06 AI data  (Read 599 times)

0 Members and 1 Guest are viewing this topic.

Offline Cowboybart

  • Classified -- Banned
  • Trade Count: (50)
  • A Real Regular
  • *
  • Posts: 628
Looking for 30-06 AI data
« on: June 13, 2009, 06:14:20 PM »
Looking for 30-06 Ack Imp data for 180gr bullets.  I have AA 2520, IMR 4320, IMR 4350, RL-19, IMR 4831 and H-870 powders on hand.
Please specify if your data used military or commercial brass.
Logged
Some is Good - More is Better - Too Much is Just Right

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26945
  • Gender: Male
Re: Looking for 30-06 AI data
« Reply #1 on: June 14, 2009, 09:49:15 AM »
I'm pretty sure the Nosler manual and maybe the Barnes manual list data for it. I can't recall for sure but maybe Hornady does as well.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Looking for 30-06 AI data
« Reply #2 on: June 14, 2009, 10:16:56 AM »
The Nosler 5th and Sierra manuals both have 30-06AI data, here's Sierra's data, they use a couple of your powders.

Tim

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Tom W.

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1294
  • Gender: Male
  • Warning... Does not play well with others!
Re: Looking for 30-06 AI data
« Reply #3 on: June 14, 2009, 10:53:08 AM »
The Loadbook for the 30-06 also has data for the A.I.
The few loads that I worked up for mine all shot very good @ 100 yards, and I was using 180 gr. GameKing bullets.

I tried 58 grains of IMR 4350
60 grains of Reloder 19
60 grains of H414
These shot well from once fired Winchester brass ( the first firing was with cast bullets and IMR 3031 to fire form the brass)
The best group came from the IMR 4350.

These results were from MY RIFLE. YOUR RIFLE MAY OR MAY NOT LIKE THEM!
Logged
Tom
Alabama Hunter and firearms safety instructor

I really like my handguns!

Offline Cowboybart

  • Classified -- Banned
  • Trade Count: (50)
  • A Real Regular
  • *
  • Posts: 628
Re: Looking for 30-06 AI data
« Reply #4 on: June 15, 2009, 04:20:33 AM »
Thanx for the link and info.  That will get me going.
Logged
Some is Good - More is Better - Too Much is Just Right

Offline Heavy C

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1088
  • Gender: Male
Re: Looking for 30-06 AI data
« Reply #5 on: August 11, 2009, 08:03:37 AM »
Has anyone here found any additional on-line resources for the 30-06 AI?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Looking for 30-06 AI data
« Reply #6 on: August 11, 2009, 08:06:22 AM »
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline TheSilverSlayer

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 104
Re: Looking for 30-06 AI data
« Reply #7 on: August 11, 2009, 07:35:14 PM »
I have a .270 AI and just started reloading for it.  I usually just start with the starting load for a standard .270 imp and then go from there.
Logged

Offline Heavy C

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1088
  • Gender: Male
Re: Looking for 30-06 AI data
« Reply #8 on: August 12, 2009, 04:21:59 PM »
Quote from: quickdtoo on August 11, 2009, 08:06:22 AM
AmmoGuide has 20 loads listed, but you have to subscribe.

Tim

http://ammoguide.com/?catid=255

http://reloadbench.com/cartridges/w3006imp.html

http://www.handloads.org/loaddata/default.asp?Caliber=30-06%20Ackley%20Improved&Weight=All&type=Rifle&Order=Powder&Source=

http://loaddata.com/loads/30-06caliberloads.html


Forgot one...

http://stevespages.com/page8c.htm



Quckdtoo you rock!  Thanks so much!

Heavy C

SilverSlayer,

I thought about doing the same, but was worried about pressure considering the difference in shape of the case.
Logged
Pages: [1]   Go Up
« previous next »