Author Topic: Firing the Soda Can Thundermug  (Read 868 times)

0 Members and 1 Guest are viewing this topic.

Offline dominick

  • GBO Sponsor
  • Trade Count: (21)
  • Senior Member
  • *****
  • Posts: 1367
  • Gender: Male
    • Black Powder Cannons & Mortars
Firing the Soda Can Thundermug
« on: August 21, 2009, 04:26:20 PM »

First firing of a soda can bore thundermug.

http://www.youtube.com/watch?v=dVBTcF3g_q0

Offline Cannoneer

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3950
Re: Firing the Soda Can Thundermug
« Reply #1 on: August 21, 2009, 05:05:29 PM »
Yeah, pretty good BOOM!
RIP John. While on vacation July 4th 2013 in northern Wisconsin, he was ATVing with family and pulled ahead of everyone and took off at break-neck speed without a helmet. He lost control.....hit a tree....and the tree won.  He died instantly.

The one thing that you can almost always rely on research leading to, is more research.

Offline brokenpole

  • GBO Supporter
  • Trade Count: (0)
  • Avid Poster
  • *****
  • Posts: 249
  • Gender: Male
Re: Firing the Soda Can Thundermug
« Reply #2 on: August 22, 2009, 03:20:16 AM »
With all the smoke coming off of that fuse I thought we were getting ready for the launch of the shuttle  :D

When the B-O-O-M went off I was convinced it was the shuttle.

Very nice Dom.

Offline Mike Scott

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 137
Re: Firing the Soda Can Thundermug
« Reply #3 on: August 22, 2009, 03:47:48 AM »
Dom,  This is the soda can thundermug I got from you this summer.
http://www.youtube.com/watch?v=Ia41AkZ4eHg

Offline Spuddy

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 315
Re: Firing the Soda Can Thundermug
« Reply #4 on: August 23, 2009, 01:32:03 AM »
After watching these two videos and looking at Dom's website to check out the max powder load for this thundermug, I have a question.  A friend of mine gave me a several cans of black powder that his father had and wanted to dispose of.  Several grades were included.  Cannon grade up to or down to FFFF.  Included with it was an eight ounce can with a cool picture of an indian on it. He gave it to me because he knows I have a few cannons and mortars.  The question is, can I safetly "dispose" of this powder using a thudermug such as the ones shown in this thread?  This powder has some age to it as the FFF and FFFF appears to have stuck together around the cover.  I tried some cannon grade in my golf ball bore Parrott (750 grains) and it did not boom at all. It just sort of wooshed and made a spectacular display of sparks in front of the barrel. 

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Firing the Soda Can Thundermug
« Reply #5 on: August 23, 2009, 08:27:21 AM »
Old black powder properly stored may be even better than new.  But improperly stored, it will tend to pick up mositure from the air.  I have some FFFg that has been stored in powder flasks that does the same thing.  I have been trying to dehumidify it by placing the flasks in the freezer to draw the water out but have not yet tested it to see it that works.
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”
--Winston Churchill

Offline dan610324

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2413
  • Gender: Male
  • bronze cannons and copper stills ;-))
    • dont have
Re: Firing the Soda Can Thundermug
« Reply #6 on: August 23, 2009, 09:05:07 AM »
wouldnt it be possible to vacuum dry it ??
same as one of my friends does with some very high quality wood for special furnitures
Dan Pettersson
a swedish cannon maniac
interested in early bronze guns

better safe than sorry

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Firing the Soda Can Thundermug
« Reply #7 on: August 23, 2009, 10:55:14 AM »
I expect vacuum drying would work fine, although you don't want to get all the moisture out.  But most people don't have a vacuum pump while they do have a freezer.
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”
--Winston Churchill

Offline dan610324

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2413
  • Gender: Male
  • bronze cannons and copper stills ;-))
    • dont have
Re: Firing the Soda Can Thundermug
« Reply #8 on: August 23, 2009, 11:08:32 AM »
what happened if the powder is too dry ??
Dan Pettersson
a swedish cannon maniac
interested in early bronze guns

better safe than sorry

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Firing the Soda Can Thundermug
« Reply #9 on: August 23, 2009, 11:23:33 AM »
what happened if the powder is too dry ??

Burns faster.
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”
--Winston Churchill

Offline Ex 49'er

  • GBO Supporter
  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 1975
  • Gender: Male
Re: Firing the Soda Can Thundermug
« Reply #10 on: August 23, 2009, 07:25:20 PM »
It's always great to see another Dom Carpenter creation.  It sure has a commanding voice.
When you're walking on eggs; don't hop!!