« previous next »
Pages: [1]   Go Down

Author Topic: trigger question  (Read 586 times)

0 Members and 1 Guest are viewing this topic.

Offline billyed

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
trigger question
« on: September 20, 2009, 10:53:19 AM »
Do the locking bolts reset the trigger so it can be cocked on an encore(pro hunter)? I have a locking bolt that is sticking,won't spring out and the gun will not cock.


Thanks
Logged

Offline trophyhunter

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 144
Re: trigger question
« Reply #1 on: September 22, 2009, 11:20:28 AM »
i had one stick once and my bolt for that paticular stock was to long
Logged

Offline southernutah

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 560
Re: trigger question
« Reply #2 on: September 23, 2009, 01:50:33 PM »
i believe that in the back position as if a barrel is installed and action closed it should cock. I just had one do the same. i took it apart and cleaned it but couldn't see anything out of place. Ressembeled it and seems ok.It also had a problem with the hammer spring. I took the hammer spring and pin from another and it cleared that up .Wouldn't reset the trigger and internal safety feature to stop hammer form hitting fireing pin if bumped. The first hammer spring and pin worked in the second OK so don't know what to think.
Logged

Offline billyed

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
Re: trigger question
« Reply #3 on: September 24, 2009, 05:56:33 PM »
After a good bit of kroil and opening,closing the action a bunch,it is working now.
Logged
Pages: [1]   Go Up
« previous next »