« previous next »
Pages: [1]   Go Down

Author Topic: extractor build up  (Read 386 times)

0 Members and 1 Guest are viewing this topic.

Offline good shot

  • Trade Count: (0)
  • Member
  • *
  • Posts: 34
extractor build up
« on: October 06, 2009, 06:38:23 AM »
Hi, Winchester Model 37 .410 gauge has a worn extractor, it works intermittantly, needs a slight build up.
Has anyone had success with JB weld for this ?
Is there a better 2 part epoxy for this purpose?
Thanks  :)
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: extractor build up
« Reply #1 on: October 06, 2009, 07:45:11 AM »
JB weld would NOT work for any build up of any part of an extractor that I'm aware of. The usual road is to silver braze on extra metal or weld  some on using MIG or TIG. Both require very good welders to be effective but these welding techniques are in common use today for many things.. The guy that does my welding is a autobody shop owner and with the thinness of todays body metal can weld almost anything made of steel with his trusty MIG..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."
Pages: [1]   Go Up
« previous next »