« previous next »
Pages: [1]   Go Down

Author Topic: 45/410 restore....  (Read 598 times)

0 Members and 1 Guest are viewing this topic.

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
45/410 restore....
« on: October 12, 2009, 09:43:45 AM »
just aquired this barrel last week and have been deal'n with the problems of accuracy.
first off the scope rail taps must have been done by a 3 year old...
the previous owner warned me of that... and its taken care of now.

the choke tube replacement was a pain too!!!
you can read more about that in the ilion satisfaction thread...
anyway i got one coming..

borrowed a set of dies from my son, until mine comes in..
found some brass and bullets i had since ???? who knows...
all i can guess is its for my ruger that i have had since 1979.
and the dies must have been stolen years ago...
anyway....

shot her this morning with 250gr cast i made, again...when..???
but it had a hope for fiddle'n wif...

i had to forget about the bead sight, cus its just there for the looks... i guess

after redrill and tap i mounted a short base and installed a cheap redot on her..
bore sited my way, unlike most do...

and she started to come alive!!!!  25 yards about 6" from my poa

moved to 50yrds 9" from poa, ok... i can deal with that..

dial'n the dot in until i got'r close ta center..

she's not a 1-holer but purdy close, maybe 2" or less.  and thats as good as i need anyway
for 50yrd shots from a moving tractor :o

here she is ... the john deere shoot'n iron!!!!!!!!!!


i thank i'm gonna like it !!!  and tha critters gonna hate it....
specially dem rattleback cotton mouths..... :o

i'm thank'n bout painter JD green and uh yeller!!!



Logged
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: 45/410 restore....
« Reply #1 on: October 12, 2009, 09:52:44 AM »
I like it!
Logged
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: 45/410 restore....
« Reply #2 on: October 12, 2009, 09:57:33 AM »
thank-ya thar swampman!!!
Logged
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 45/410 restore....
« Reply #3 on: October 12, 2009, 12:28:32 PM »
Looks "Handi", congrats!!  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: 45/410 restore....
« Reply #4 on: October 12, 2009, 12:30:57 PM »
I'm still waiting on mine to come in from backorder. :(
I can't wait to tinker with it.



Spanky
Logged

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: 45/410 restore....
« Reply #5 on: October 12, 2009, 12:43:44 PM »
tim, i have a gun rack on the left side of tha cab in tha tractor... most long guns won't fit but,
this does real gud!!!  gonna be bush-hawg'n next weekend fer bout 6 hours
thats when them thangs start ta crawl...kilt one coupla weeks ago had 12 rattles and was
5' long. my grandson was play'n around that spot earlier...thats what its gonna be handi for...

spanky, you'll be tinker'n bet-cha!!!!

thanks

Logged
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline JerryKo

  • GBO Supporter
  • Trade Count: (64)
  • A Real Regular
  • *****
  • Posts: 954
  • Gender: Male
Re: 45/410 restore....
« Reply #6 on: October 14, 2009, 09:56:25 AM »
Hey Jonh!...late to the party again.  Glad to hear you got it shooting so fast!  2" at 50 yds is excellent for that barrel...  Pm me your load if ya dont mind.  Give me all the details.  I had to go LONG brass to get mine to group.  Looking forward to it.

Jerry
Logged
"It's not whether you get knocked down, it's whether you get up."- Vince Lombardi

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: 45/410 restore....
« Reply #7 on: October 14, 2009, 11:09:53 AM »
I know all about rattlesmakes, tractors and tractor guns.  I banded hawks for 5 or 6 years on a mountain top near the Delaware Water Gap in NJ named Rattlesnake Mountain......not because there were none there ::)  I fished the Wanaque River between Greenwood Lake and the Wanaque Reservoir, and when the morning sun hit the rocky west bank, it was alive with rattlers.  Then I moved to Florida....nuf said.  Finally, I got smart and moved to Da U.P. of Michigan.....no nasty snakes.  It's nice not to have to look behind every rock and log for them.

A relative owned a dairy farm in upstate NY, and we hunted deer there.  As a thank you, about 40 years ago, we gave him a .22 magnum for Christmas.  It became his tractor gun and has accounted for literally hundreds of deer, chucks and other varmints over the years.  He since moved to Wisconsin.

I'm on my own 120 acre farm here, and my truck/tractor gun is being built.  It's a Handi .357 max, cut to 16.5 inches, with a red dot and a youth stock.  I think I'm gonna love it.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: 45/410 restore....
« Reply #8 on: October 14, 2009, 02:22:47 PM »
sounds like a gud utility gun thar pete,
i like tha scatter option on the colt barrel cus i can't hit nutt'n from a roll'n tractor unless its got
lottsa pro-jectiles ;D... every now an then i find a bedded up bobby or a coydog, thats what the 45
is fer...  they kinda use to tha tractor cus i'm always invaid'n there domain.
here in tha swamp ain't no tell'n what you'll come a cross.
gotta spill over pond from the river an dem gators like ta get sun on tha banks, and eat my kitty's
that doan do gud wif me, cus them kitty's eat lottsa field rats..keeps sum outta my corn drier.....
ya'll ever smelled a corn drier with a buncha rats cook'n??  notta gud thang.. no !!!!!
Logged
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline J. J. Magnum

  • Trade Count: (2)
  • Member
  • *
  • Posts: 52
Re: 45/410 restore....
« Reply #9 on: October 15, 2009, 12:11:13 PM »
Hey Doc, try those Winchester buckshot rounds from your 45/410.  The three piece 000 buck prints nicely from my 45/410 Survivor.  I can keep them fairly tight on a paper plate at 25 yds. but I don't know about further out.

Since I had a front sight put on mine (you are right the bead is just for looks) and added an XS ghost ring backup sight to the scope rail I'm pretty happy with it.

It's the bottom one in this photo:



A closer view of the XS sight...



Kind of a fuzzy view of the sight picture...



Logged

Offline peternap

  • Trade Count: (5)
  • Contributor
  • ***
  • Posts: 385
Re: 45/410 restore....
« Reply #10 on: October 15, 2009, 12:58:02 PM »
I think you'll love it. I carry my BFR in 45c/410 on my tractor and ATV.

The shot comes in real handi and you can carry a couple of buckshot loads for anything bigger.
Logged

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: 45/410 restore....
« Reply #11 on: October 15, 2009, 01:06:58 PM »
JJMagnum,

What front site is that and where can I get one?
My 45/410 is still on backorder but I want to put sites on it when I get it. ;)
Also do you have the part number for the rear site?



Spanky
Logged

Offline J. J. Magnum

  • Trade Count: (2)
  • Member
  • *
  • Posts: 52
Re: 45/410 restore....
« Reply #12 on: October 16, 2009, 01:24:06 PM »
I can't say about the front sight, my gunsmith picked it out to be high enough to go with the rear sight on the rail.  The rear sight can be found at:

http://www.xssights.com/store/rifle.html

Logged

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: 45/410 restore....
« Reply #13 on: October 16, 2009, 01:41:25 PM »
jj
check with your smith, and see if you can get info on the front site...
thanks
Logged
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.
Pages: [1]   Go Up
« previous next »