« previous next »
Pages: [1]   Go Down

Author Topic: Winchester model 69  (Read 1118 times)

0 Members and 1 Guest are viewing this topic.

Offline trkyman1

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 154
Winchester model 69
« on: October 17, 2009, 05:34:53 AM »
I have a model 69 .22 that won't eject the casings. Everthing looks ok with the bolt. It will feed fine but just wont eject. Anyone have any info on these winchesters? Is there a part missing?
Logged

Offline bobg

  • GBO Supporter
  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 1555
  • Gender: Male
Re: Winchester model 69
« Reply #1 on: October 17, 2009, 06:13:45 AM »
   Really can't help you with that. I have had one for over forty years. I wouldn't dare to say how many rounds have been fired through it. Never had any problems with it.
     bobg
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Winchester model 69
« Reply #2 on: October 17, 2009, 07:09:49 AM »
Is the rifle a M69 or a M69A? The 69A has the safety on the side of the stock and cocks on the opening stroke of the bolt. The M69 cocks on the closing stroke of the bolt and the safety is on the rear of the bolt. I'll post a link to a diagram below for a M75 which uses the same action as the M69A but whose diagram contains a blow up os the bolt. Does the rifle work the same with both fired and unfired rounds. Does it remove the round from the chamber? Does it fail to kick the round out of the action..? A little more info should allow us to debug this fine little rifle.. All told just now I own about a dozen of this and associate models..  They are really fine rifles..

http://stevespages.com/ipb-winchester-75.html

Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline trkyman1

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 154
Re: Winchester model 69
« Reply #3 on: October 18, 2009, 11:14:09 AM »
It is a model 69. It just wont eject but it grabs the casing. I think there is a part missing that is supposed to kick the casing out. If I had a diagram of the parts I could solve this mystery but I cant find one.
Logged

Offline trkyman1

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 154
Re: Winchester model 69
« Reply #4 on: October 18, 2009, 11:16:41 AM »
OOps I just saw it on your link. Yep Im missing a part. It is item 20 on the link diagram. So where can I get this part?
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Winchester model 69
« Reply #5 on: October 18, 2009, 08:24:15 PM »
Try Numeric gun parts.. They may have one if not the used parts guys are your best bet. This is not an easily broken part so it's not likely reproduced..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline trkyman1

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 154
Re: Winchester model 69
« Reply #6 on: October 19, 2009, 12:05:59 AM »
Ok thanks for the help.
Logged
Pages: [1]   Go Up
« previous next »