« previous next »
Pages: [1]   Go Down

Author Topic: H335 for 444  (Read 497 times)

0 Members and 1 Guest are viewing this topic.

Offline bishopgrandpa

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 113
  • Gender: Male
H335 for 444
« on: October 31, 2009, 06:30:45 AM »
The label on a bottle of H335 recommends 56gr for 265 gr bullet. I tried it and put through five rounds at 75 yds and all were touching. loaded five more the next day and got the same. Anyone else use this load. The gun of course was an H&R 444 and the bullet a Hornady 265FN.
Logged

Offline dpe.ahoy

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 3363
  • Gender: Male
Re: H335 for 444
« Reply #1 on: October 31, 2009, 09:26:18 AM »
Haven't tryed it yet, but will now. ;)  I did pick up a pound of it to try after re-reading Brian Pierce's artical in an old copy of "Handloader" on the triple 4.  DP
Logged
RIP Oct 27, 2017

Handi's:22Shot, 22LR, 2-22Mag, 22Hornet, 5-223, 2-357Max, 44 mag, 2-45LC, 7-30 Waters, 7mm-08, 280, 25-06, 30-30, 30-30AI, 444Marlin, 45-70, AND 2-38-55s, 158 Topper 22 Hornet/20ga. combo;  Levers-Marlins:Two 357's, 44 mag, 4-30-30s, RC-Glenfields 36G-30A & XLR, 3-35 Rem, M-375, 2-444P's, 444SS, 308 MX, 338Marlin MXLR, 38-55 CB, 45-70 GS, XS7 22-250 and 7mm08;  BLR's:7mm08, 358Win;  Rossi: 3-357mag, 44mag, 2-454 Casull; Winchesters: 7-30 Waters, 45Colt Trapper; Bolt actions, too many;  22's, way too many.  Who says it's an addiction?

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: H335 for 444
« Reply #2 on: October 31, 2009, 09:29:02 AM »
I use H4198 for the 240gr and 265gr bullets, Rl7 for the 355gr Beartooth gas checked cast, both powders shoot under 1" at 100yds.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Plainsman

  • Trade Count: (5)
  • Contributor
  • ***
  • Posts: 302
  • Gender: Male
Re: H335 for 444
« Reply #3 on: October 31, 2009, 10:08:15 PM »
I use H335, but not that much...From the top of my head, I'm between 50 and 51 grain with a 265gr Hornady bullet.  I can keep three rounds touching standing supported at 50 yards.  I can't ask for more than that!

I use the same bullet for my .44's for deer hunting and they are the same with medium loads! ;)  I attribute the bullet and Marlin's rifling to it!  I have 1 in 20" twists in all my lever guns! :)
Logged
Plainsman :)

plainsmanscabin@yahoo.com

"Aim small, miss small!"
Pages: [1]   Go Up
« previous next »