« previous next »
Pages: [1]   Go Down

Author Topic: Failed attempt at spray bombing a plastic stock please advise  (Read 779 times)

0 Members and 1 Guest are viewing this topic.

Offline manofthe45

  • Trade Count: (36)
  • A Real Regular
  • ****
  • Posts: 834
  • Gender: Male
  • Bucks Hang On The Wall. Does Fill The Freezer
Failed attempt at spray bombing a plastic stock please advise
« on: October 11, 2009, 04:10:23 PM »
Is there anything that will cure the paint or do I really have to use thinner to remove it all.  I had sanded the entire stock before painting but it still didn't adhere.  Stratches right off
Logged
NRA Member

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Failed attempt at spray bombing a plastic stock please advise
« Reply #1 on: October 11, 2009, 04:17:08 PM »
Try Krylon Fusion paint, many here have used it with excellent results, colors are limited tho.

Tim

http://www.krylon.com/products/fusion_for_plastic
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Failed attempt at spray bombing a plastic stock please advise
« Reply #2 on: October 11, 2009, 06:12:59 PM »
I've not painted many stocks but the Fusion paint is made for plastics and worked well for me in other applications. Be sure the surface of the stock is sompletely clean. I would clean with a solvent like acetone or mineral spirits to remove any mold release agent or other contaminants prior to painting. The is another brand of paint that's designed for painting gunstocks but the name escapes me just now. It has even been banned from NewYorkCity so It must be really great!!
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: Failed attempt at spray bombing a plastic stock please advise
« Reply #3 on: October 12, 2009, 02:06:44 AM »
KG Industries Gun Kote stock paint works well too. It's an air cure so no baking, and the colors match regular baked on Gun Kote.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline madcratebuilder

  • Trade Count: (0)
  • Member
  • *
  • Posts: 95
Re: Failed attempt at spray bombing a plastic stock please advise
« Reply #4 on: October 13, 2009, 02:15:23 AM »
Lacquer thinner as a cleaner/prep.  It well some times soften the surface of the plastic and give the paint excellent adhesion.
Logged

Offline diggler1833

  • Trade Count: (4)
  • Contributor
  • ***
  • Posts: 464
  • Gender: Male
Re: Failed attempt at spray bombing a plastic stock please advise
« Reply #5 on: October 25, 2009, 11:14:43 PM »
Prep is a must!

Aerosol can spray paint in general will not last through much contact at all.  If it did, there wouldn't be much of a market for anything else for the tactical crowd (although quite a few of them still rattle-can their weapons).
Logged

Offline hunt-m-up

  • GBO Supporter
  • Trade Count: (27)
  • Senior Member
  • *****
  • Posts: 1122
  • Gender: Male
Re: Failed attempt at spray bombing a plastic stock please advise
« Reply #6 on: October 26, 2009, 05:21:21 AM »
Quote from: madcratebuilder on October 13, 2009, 02:15:23 AM
Lacquer thinner as a cleaner/prep.  It well some times soften the surface of the plastic and give the paint excellent adhesion.

+1 on this, whatever your choice of solvent to prep the stock, most will soften the plastic and help the paint bond. I like Krylon with a follow up coat or 3 of matte "clear coat" finish, all available in rattle cans if you choose to go that route. Give it at least a week in a heated room to cure. Diggler is right though, this is not a real permanent finish.
Logged
Crosman Slingshot, Daisy Red Ryder, dull butter knife

Offline gwindrider1

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 446
Re: Failed attempt at spray bombing a plastic stock please advise
« Reply #7 on: November 02, 2009, 02:57:58 AM »
I am assuming that you have one of the "Tupperware" type stocks that are truly injection molded plastic, rather than the kevlar/fiberglass hand laid type.  These can be a problem, but if you clean it with acetone, then use the Krylon Fusion paint for the base coat, you should be able to get good adhesion with regular spray paints on top of that.
Logged
Pages: [1]   Go Up
« previous next »