« previous next »
Pages: [1]   Go Down

Author Topic: Bergara barrels problems for the TC Encore  (Read 2679 times)

0 Members and 1 Guest are viewing this topic.

Offline ROBERT_E67

  • Trade Count: (0)
  • Posts: 1
Bergara barrels problems for the TC Encore
« on: October 15, 2009, 01:59:21 PM »
I ordered a Bergara 3006 barrel from cabelas. For my T/C Encore,on the FIRST shot the shell casing was stock in the barrel.Had two gunsmiths work on it and they could not get the case out without damaging the barrel.Cabelas is sending me a new barrel great. Has anybody ever have this problem.
Logged

Offline SD Handgunner

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 658
Re: Bergara barrels problems for the TC Encore
« Reply #1 on: October 15, 2009, 02:53:50 PM »
I am shooting a Bergara .30-06 Barrel on my T/C Encore. Other than a forend bedding issue I sure have no complaints with my barrel. In fact I am quite happy with the way it shoots.

Larry
Logged
T/C Handguns, one good shot for your moment of truth !

Offline Keith L

  • Moderator
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 3781
Re: Bergara barrels problems for the TC Encore
« Reply #2 on: October 15, 2009, 03:18:34 PM »
Anything made by man has the potential to have problems.  I had to send back a new 700 BDL 7mm08 because of a bad chamber.
Logged
"Beer is proof that God loves us and wants us to be happy."  Benjamin Franklin

Offline bphunter

  • Trade Count: (8)
  • Member
  • *
  • Posts: 58
Re: Bergara barrels problems for the TC Encore
« Reply #3 on: October 21, 2009, 02:45:53 PM »
I have 4 Bergara barrels -  .243 WIN, .308 WIN, .30-06, and 209x50 ML. Mine are all SS and shoot fantastic.  I inspected the machine work for the chambers and rifling very carefully when I bought them and I must say I was very pleased. Was the case stuck in the chamber or did the action stick closed? A stuck cartridge might indicate a flaw in the chamber wall.
Logged

Offline bubba

  • Trade Count: (62)
  • Senior Member
  • *****
  • Posts: 1898
  • Gender: Male
Re: Bergara barrels problems for the TC Encore
« Reply #4 on: October 22, 2009, 02:36:33 AM »
my silly thinking were they reloads or factory? Were they hot reloads that caused over expansion?  I have seen it. If they cant get the casing out without damage, I would think the cartridge is melted into the chamber.
Logged
”A gun is like a parachute. If you need one, and don’t have one, you’ll probably never need one again.”

Molon Labe

Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline pozoutdoors

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 225
  • Gender: Male
Re: Bergara barrels problems for the TC Encore
« Reply #5 on: October 22, 2009, 04:02:04 PM »
I would think there is a burr or over head space... I only buy tc. I like to buy american!!!! Check for dirty brass and dirty chamber!!! I had a rough dirty brass stick in a rusty chamber in my m70 once.  I ran a brass brush rapped in steal wool & oiled through it a few times and it fixed it!!!!!
Logged

Offline nomosendero

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5760
  • Gender: Male
Re: Bergara barrels problems for the TC Encore
« Reply #6 on: October 29, 2009, 04:58:52 PM »
Quote from: pozoutdoors on October 22, 2009, 04:02:04 PM
I would think there is a burr or over head space... I only buy tc. I like to buy american!!!! Check for dirty brass and dirty chamber!!! I had a rough dirty brass stick in a rusty chamber in my m70 once.  I ran a brass brush rapped in steal wool & oiled through it a few times and it fixed it!!!!!

Oh really, have you heard who is making TC barrels now?
Logged
You will not make peace with the Bluecoats, you are free to go.

Offline mirage1988

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1665
Re: Bergara barrels problems for the TC Encore
« Reply #7 on: October 29, 2009, 05:12:50 PM »
No, But I'm sure you are going to tell me!
Logged

Offline SD Handgunner

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 658
Re: Bergara barrels problems for the TC Encore
« Reply #8 on: October 29, 2009, 08:32:38 PM »
Quote from: nomosendero on October 29, 2009, 04:58:52 PM
Oh really, have you heard who is making TC barrels now?

I would like to hear the answer to that also.

Larry
Logged
T/C Handguns, one good shot for your moment of truth !

Offline pozoutdoors

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 225
  • Gender: Male
Re: Bergara barrels problems for the TC Encore
« Reply #9 on: October 30, 2009, 09:05:49 AM »
Me too!!! I've looked for it and can't find anything about them being made elsewhere!!! I've been wrong before!!!
Logged

Offline nomosendero

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5760
  • Gender: Male
Re: Bergara barrels problems for the TC Encore
« Reply #10 on: October 30, 2009, 05:38:40 PM »
Not yet Mirage until I get the whole scoop.

A Midway rep told me yesterday that TC have outsourced the break-open barrels. I heard it from another source a week ago & did not buy it at the time. At this point I am 95%, but I won't tell unil I am 100%, I don't want to spread false info. I hope to be sure next week.

I shouldn't have said anything yet, but I saw the "only buy American" comment, which I understand, but you
may not be doing that from this point on.

Later
Logged
You will not make peace with the Bluecoats, you are free to go.
Pages: [1]   Go Up
« previous next »