« previous next »
Pages: [1]   Go Down

Author Topic: 45/410 using 460 brass  (Read 442 times)

0 Members and 1 Guest are viewing this topic.

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
45/410 using 460 brass
« on: November 02, 2009, 07:14:14 PM »
Has anyone here tried reloading for the 45/410 H&R barrel using 460 S&W brass. I'm not talking about hot loads... just using the longer brass to take up some of the freebore.
I just got one of these barrels and want to experiment a little bit with it. I know about the 450 Mongo but I'm looking to see what else can be done with it.
Once again... I'm talking about only loading to 45LC pressures but using 460 brass.
The barrel is on an SB1 frame so low pressure only.

Any other tips or hints with this barrel are welcome but no hot rod loads ;)



Spanky
Logged

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: 45/410 using 460 brass
« Reply #1 on: November 05, 2009, 02:56:36 AM »
Spanky,

Do you have any 460 brass to see if it will chamber? I was curious about your question myself so I started searching and found this thread from another forum - http://www.thehighroad.org/showthread.php?p=4556160#post4556160. If you read through it you'll see a post from someone who says that they have the same gun and the chamber is cut so that 454 or 460 brass will not chamber. If that is the case then obviouly you'd have to ream it first to accept the 460 brass.
Logged
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: 45/410 using 460 brass
« Reply #2 on: November 06, 2009, 05:05:31 AM »
I don't have any 460 brass to check. I could take my gun to my dealer and check some brass for fit. I'll check it out and post whether it fits or not.
Thanks for the link Doublebass.



Spanky
Logged
Pages: [1]   Go Up
« previous next »