« previous next »
Pages: [1]   Go Down

Author Topic: .260 brass  (Read 1817 times)

0 Members and 1 Guest are viewing this topic.

Offline hank440

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
.260 brass
« on: March 25, 2009, 09:15:15 AM »
what brass are you guys using for the .260 ?

Thanks

Hank
Logged

Offline yankee

  • Trade Count: (0)
  • Member
  • *
  • Posts: 87
Re: .260 brass
« Reply #1 on: March 25, 2009, 02:36:36 PM »
Lapua seems to be the most consistant these days.  I have used fed. win and rem also.  .308 necked down and 243 opened  up.  If you make samples of all of these you will find they will have different neck diameters and one that closest fits the size of the chamber of the rifle.  It seems like one that is .002 to .003 smaller than the chamber neck works best.
Logged

Offline Win 1917

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 186
  • Gender: Male
Re: .260 brass
« Reply #2 on: May 23, 2009, 01:34:26 AM »
Which Lapua brass are most people using, 308 or 243?
Logged

Offline Drue

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
Re: .260 brass
« Reply #3 on: June 10, 2009, 10:03:25 AM »
I use the Lapua .243 brass.

Drue
Logged

Offline COLT45

  • Trade Count: (0)
  • Member
  • *
  • Posts: 33
Re: .260 brass
« Reply #4 on: December 11, 2010, 10:48:16 AM »
NORMA makes good  .260 BRASS.

REMINGTON =Not so good. the first few reloads are ok. Then soot starts to leak around the primers as the brass is a bit soft.

FEDERAL makes .260 brass-I do not know how good it is.
Logged

Offline Blackwell bikes

  • Trade Count: (0)
  • Member
  • *
  • Posts: 12
Re: .260 brass
« Reply #5 on: January 15, 2011, 02:22:21 AM »
Just saw lapua will be offering .260, think is might be at shot show
Logged
Pages: [1]   Go Up
« previous next »