« previous next »
Pages: [1]   Go Down

Author Topic: Is Rem 7600 barrel threaded into the lug w/ the same threads as 700?  (Read 1054 times)

0 Members and 1 Guest are viewing this topic.

Offline smong2000

  • Trade Count: (45)
  • Contributor
  • ***
  • Posts: 376
Is Rem 7600 barrel threaded into the lug w/ the same threads as 700?
« on: January 15, 2010, 02:38:02 PM »
I reworded my question to see if that would get any responses.  I know how to take off the barrel assembly but wanted to find out if the lugs are contained in a seperate piece and if a different barrel could be just screwed into it, and properly headspaced of course.  If so, is it the same barrel threading as a 700? Or a common thread?? If I wanted to go to a short cartridge with the same bolt head size do i need to do anything other than get a new magazine?
Thanks in advance.
Logged

Offline smong2000

  • Trade Count: (45)
  • Contributor
  • ***
  • Posts: 376
Re: Is Rem 7600 barrel threaded into the lug w/ the same threads as 700?
« Reply #1 on: January 18, 2010, 06:21:49 AM »
Let's see if this wording works...Thanks
Logged

Offline wackmaster

  • Trade Count: (0)
  • Member
  • *
  • Posts: 82
Re: Is Rem 7600 barrel threaded into the lug w/ the same threads as 700?
« Reply #2 on: January 19, 2010, 03:26:58 AM »
No the 700 and the 7600 are not the same!
the 7600 lugs up in the barrle!
Logged

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: Is Rem 7600 barrel threaded into the lug w/ the same threads as 700?
« Reply #3 on: January 19, 2010, 03:29:18 AM »
Accuracy ststems does a lot of custom work on the Rem pumps and autos. Look them up they may give you some good info.
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline smong2000

  • Trade Count: (45)
  • Contributor
  • ***
  • Posts: 376
Re: Is Rem 7600 barrel threaded into the lug w/ the same threads as 700?
« Reply #4 on: January 19, 2010, 11:38:46 AM »
Thanks Guys, I'll give them a call.
Logged

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: Is Rem 7600 barrel threaded into the lug w/ the same threads as 700?
« Reply #5 on: January 20, 2010, 07:56:18 AM »
Yes the barrel has a threaded shank and the locking lugs can be simply unscrewed and threaded onto a new barrel. The threads are not the same but  but when threading with a lathe they are not a problem. Removing the barrel extension is a real problem but it can be done. There are no problems switching to a short action caliber,,other than mags..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline yosemite

  • Trade Count: (1)
  • Member
  • *
  • Posts: 51
Re: Is Rem 7600 barrel threaded into the lug w/ the same threads as 700?
« Reply #6 on: November 30, 2010, 10:50:43 PM »
I remember they are 20 tpi, and at some point went from RH to LH threads, maybe at 760-7600 transition, the rh threads had a nasty habit of unscrewing from bolt rotation and creating phenominal headspace problems, one of the reboring guys, does almost all calibers out to 358 win, or 35 whelen, depending on long or short, the job runs 225 as I remember, not bad for making a woods thumper!
Logged
Pages: [1]   Go Up
« previous next »