« previous next »
Pages: [1]   Go Down

Author Topic: PF9 shoots 8" low at 10 yds, how do I fix it?  (Read 2981 times)

0 Members and 1 Guest are viewing this topic.

Offline smong2000

  • Trade Count: (45)
  • Contributor
  • ***
  • Posts: 376
PF9 shoots 8" low at 10 yds, how do I fix it?
« on: December 04, 2009, 11:02:03 AM »
I have a PF9 that is shooting around 8" low at 10 yds with the FMJ stuff that I've been trying.  The front sight is already pretty short so that's not an option.  Anyone have this problem, what's the best way to deal with it on this pistol.  The rear doesn't appear to have any elevation adjustment. I only tried the 110 FMJ in Remington and UMC so far and they are similar.
Thanks
Logged

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26945
  • Gender: Male
Re: PF9 shoots 8" low at 10 yds, how do I fix it?
« Reply #1 on: December 04, 2009, 11:51:22 AM »
Try other ammo until you find one that shoots close enough to POA. If that doesn't work after trying several different ammo types contact Kel-Tec about it. They are quite good at working with folks who own their guns to fix problems. I doubt there is anything you can do to it yourself to alter the POI other than using different ammo.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: PF9 shoots 8" low at 10 yds, how do I fix it?
« Reply #2 on: December 04, 2009, 12:49:14 PM »
As Bill suggested, if it doesn't shoot right with other ammo, contact K-T and they'll send you the shims for the rear sight. Mine shoots good  with the Rem UMC and Fed American Eagle 115gr FMJ.

Tim

http://www.kel-tec-cnc.com/cart2/contact_us.php

http://www.kel-tec-cnc.com/pf9.htm

The rear sight is a new design and is adjustable for windage with the supplied allen wrench as well as for elevation with the use of shims (not included).
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Tonk

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 373
Re: PF9 shoots 8" low at 10 yds, how do I fix it?
« Reply #3 on: December 14, 2009, 05:04:37 AM »
I only had one Kel-Tec that shot a little low but not like your speaking of with your pistol. Graybeard told you true, try some different ammo first off and see how that does for you. Now also try shooting that pistol from a rest, just to make sure you are not causing the problem.

I saw where a fellow at our gunclub had to shim a Kel-Tec P-11 model and it is no big deal to do so

Yeah, what's this donation business? How much and does the POPE get any of this money or any political party? :-*
Logged

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: PF9 shoots 8" low at 10 yds, how do I fix it?
« Reply #4 on: December 17, 2009, 08:56:20 AM »
Kel tec uses shims under the rear sight to adjust elevation on the PF9. Should be easy to fix your problem with some shim stock.
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline gunbuyer76

  • Trade Count: (1)
  • Member
  • *
  • Posts: 15
  • Gender: Male
Re: PF9 shoots 8" low at 10 yds, how do I fix it?
« Reply #5 on: December 19, 2009, 05:07:08 PM »
try shooting some 147's out of it,
Logged

Offline 95Road King

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 252
Re: PF9 shoots 8" low at 10 yds, how do I fix it?
« Reply #6 on: December 20, 2009, 02:52:02 PM »
 What Gunbuyer76 said. More recoil = more elavation!!
Logged

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: PF9 shoots 8" low at 10 yds, how do I fix it?
« Reply #7 on: December 21, 2009, 02:14:59 AM »
Sights are adjustable for a reason. Shim it, drift it, shoot it.
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline smong2000

  • Trade Count: (45)
  • Contributor
  • ***
  • Posts: 376
Re: PF9 shoots 8" low at 10 yds, how do I fix it?
« Reply #8 on: December 22, 2009, 12:58:14 PM »
Thanks Guys, it was an easy fix with the right info.... ;D
1st I takes the screw allll the way out, then put a couple slices of aluminum can in, then I puts the screw back in...never thought of something that easy  ::)
Logged

Offline preventec47

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 172
Re: PF9 shoots 8" low at 10 yds, how do I fix it?
« Reply #9 on: January 03, 2010, 05:58:52 AM »
What I did was simply change my sight picture.  I now hold the front
sight over the target instead of under it. ( my p3AT )
Logged

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: PF9 shoots 8" low at 10 yds, how do I fix it?
« Reply #10 on: January 03, 2010, 08:14:22 AM »
Quote from: preventec47 on January 03, 2010, 05:58:52 AM
What I did was simply change my sight picture.  I now hold the front
sight over the target instead of under it. ( my p3AT )
That's about all you can do with a P3AT if you insist on using the sights. I can make solid torso hits out to 15yds or so point shooting. That's good enough for me. The PF9 actually has usable sights.
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,
Pages: [1]   Go Up
« previous next »