Author Topic: 204 ruger  (Read 713 times)

0 Members and 1 Guest are viewing this topic.

Offline sk330lc

  • GBO Supporter
  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 1102
  • Gender: Male
204 ruger
« on: December 11, 2009, 01:11:18 PM »
Whats your favorite pet load? For the 204 Ruger in your Encores?   What Bullets work best and what powder?  Thanks.
Be True to What You Hunt!!!!!
SUPPORT THE GBO SERVER
http://www.gboreloaded.com/forums/index.php/topic,191112.0/topicseen.html

Offline Luckyducker

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 645
Re: 204 ruger
« Reply #1 on: December 12, 2009, 02:23:56 AM »
I have the 28" Prohunter barrel in 204 and it really likes 27.1 grains of H4895 in Winchester brass and 40 grain Hornady V-Max bullets lit with Win small rifle primers.  Some say their 1/12" twist barrels (which is what the T/C uses) won't stabilize 40 grain cup and core bullets but mine does, to the tune of .25"- .5" groups at 100yds.

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
Re: 204 ruger
« Reply #2 on: December 12, 2009, 03:52:46 AM »
I use Hornady 45 gr. Spire Points over RL-15 in mine.

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Re: 204 ruger
« Reply #3 on: December 12, 2009, 05:18:08 AM »
Currently I have 3 .204 Rugers on a Contender platform....all carbines and all 23". I have had great luck with several combinations of powders and 32 gr. bullets from both Sierra and Hornady. Right now my new favorite powder is RL-10x but I have also used RL15, WW748, H322. I shoot a ton of prairie dogs with mine so I get to stretch them out quite aways.

Offline nomosendero

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5760
  • Gender: Male
Re: 204 ruger
« Reply #4 on: December 12, 2009, 07:27:11 AM »
I have the 28" Prohunter barrel in 204 and it really likes 27.1 grains of H4895 in Winchester brass and 40 grain Hornady V-Max bullets lit with Win small rifle primers.  Some say their 1/12" twist barrels (which is what the T/C uses) won't stabilize 40 grain cup and core bullets but mine does, to the tune of .25"- .5" groups at 100yds.

Very nice, if I knew I could get that kingd of accuracy with the 40 I would have to try one of these tubes.
You will not make peace with the Bluecoats, you are free to go.

Offline sk330lc

  • GBO Supporter
  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 1102
  • Gender: Male
Re: 204 ruger
« Reply #5 on: December 12, 2009, 04:48:18 PM »
anybody using the 39gr Sierra ??
Be True to What You Hunt!!!!!
SUPPORT THE GBO SERVER
http://www.gboreloaded.com/forums/index.php/topic,191112.0/topicseen.html

Offline Preacherman

  • Trade Count: (31)
  • Contributor
  • ***
  • Posts: 352
  • Gender: Male
Re: 204 ruger
« Reply #6 on: December 13, 2009, 08:01:03 AM »
I had a stainless 23" Contender that liked 40gr Vmax with H322 the best I ever did was .33 less than an inch on a real bad day had a senior moment and traded for a 223 shoots good but like the 204.
Preacherman
Acts10:13