« previous next »
Pages: [1]   Go Down

Author Topic: Found in a gun shop today  (Read 897 times)

0 Members and 1 Guest are viewing this topic.

Offline chevyone

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 100
  • Gender: Male
Found in a gun shop today
« on: December 03, 2009, 02:49:23 PM »
I found a 243 handi with a 20 gauge barrel. The intresting thing about it is the receiver is nickel and both barrels are blued. The 243 must be a superlight as it is drilled and tapped for rail but has open sights.
I checked the numbers and both of the barrels have the last three serial numbers to match the receiver.
The 20 says 20 gauge partner and it all sits in a youth synthetic stock.
 
Did they make such a rifle or is this a special build rifle?
Any info would be great.
Thanks
Logged
Skin that smoke wagon and see what happens!!

You can't fix stupid!!!!!!

Offline cbourbeau32

  • GBO Supporter
  • Trade Count: (44)
  • A Real Regular
  • *****
  • Posts: 801
  • Gender: Male
Re: Found in a gun shop today
« Reply #1 on: December 03, 2009, 03:36:18 PM »
I would be interested to hear the answer to your questions as well.
Logged
NRA Life Member, US Navy Veteran.

Oklahoma has 77 counties, Romney-77, Obama-0

I'll keep my Guns, my Freedom's and my Money.
You can keep the "Change"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Found in a gun shop today
« Reply #2 on: December 03, 2009, 03:40:45 PM »
It could be a special order combo, or it could also just be accessory barrels ordered by an individual.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline chevyone

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 100
  • Gender: Male
Re: Found in a gun shop today
« Reply #3 on: December 03, 2009, 03:45:37 PM »
Is there a way to tell if its a sb2 receiver by serial number.
I will contact H@R tomorrow to make sure this is the right receiver.

Thanks
Logged
Skin that smoke wagon and see what happens!!

You can't fix stupid!!!!!!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Found in a gun shop today
« Reply #4 on: December 03, 2009, 04:03:19 PM »
No way to tell by the serial number or us, H&R can tho. The differences are shown in the FAQs and Help sticky, most obvious difference is the tang around the stock bolt thread mounting hole is skeletonized on an SB2, solid on an SB1.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline chevyone

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 100
  • Gender: Male
Re: Found in a gun shop today
« Reply #5 on: December 03, 2009, 04:05:11 PM »
Don't expect they would like that if I tore there gun down in front of them. ;D
I will find out what it was when it left the factory.
Logged
Skin that smoke wagon and see what happens!!

You can't fix stupid!!!!!!

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Found in a gun shop today
« Reply #6 on: December 04, 2009, 02:54:06 AM »
All ya need is a phillips screwdriver, a 9/16 socket, ratchet and long extention.  Then you could give them a lesson on Handi Anatomy 101 ;D :D ;) ::) :o

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Re: Found in a gun shop today
« Reply #7 on: December 04, 2009, 03:03:57 AM »
I have done that. They get pissed when it does not go back together.
Logged

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Found in a gun shop today
« Reply #8 on: December 04, 2009, 05:26:20 AM »
Can't you tell by the front of the reciever? I hope so as this is what I've been going on. Never took a stock off yet. What year does the prefix say it is? New?
Gander Mtn. has 44 mag with scope with new prefix sb1 with a nickel looking frame.
Logged

Offline chevyone

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 100
  • Gender: Male
Re: Found in a gun shop today
« Reply #9 on: December 04, 2009, 07:02:30 AM »
Well another handi comes home with me. Not the 45/70 but a 243 for my daughters first deer rifle.
I called H@R while I was at the gun shop, They told me that the receiver was safe to handle any barrel they have. ;D

It has a 20 partner 3" mod ejector shotgun and a 243 superlight with open sights and weaver rail and a redfield 1x-4x scope on it.
Don't know much about the scope?
I paid $250 out the door for it. ;D
Thanks
Logged
Skin that smoke wagon and see what happens!!

You can't fix stupid!!!!!!

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Found in a gun shop today
« Reply #10 on: December 04, 2009, 07:26:49 AM »
I Think You Done REAL GOOD! I'd have it if I saw it ;D That should be a good scope. What reticle? You may have to do a little work with that SL barrel but that's OK!
That is probably the Handiest combo for your intended use. ;)
Please keep us posted on how it/she does. Good Luck!
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Found in a gun shop today
« Reply #11 on: December 04, 2009, 09:35:20 AM »
I'd say you did really well.  That combination could keep a young lady smiling for the rest of her life.  Wish her good hunting and shooting from me.

You've probably created a new Handiholic.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline Jon in TN

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 200
Re: Found in a gun shop today
« Reply #12 on: December 04, 2009, 01:19:33 PM »
Quote from: chevyone on December 04, 2009, 07:02:30 AM
Well another handi comes home with me. Not the 45/70 but a 243 for my daughters first deer rifle.
I called H@R while I was at the gun shop, They told me that the receiver was safe to handle any barrel they have. ;D

It has a 20 partner 3" mod ejector shotgun and a 243 superlight with open sights and weaver rail and a redfield 1x-4x scope on it.
Don't know much about the scope?
I paid $250 out the door for it. ;D
Thanks

I'd love to run across a deal like that for my son!!!!

Congrats on the find..
Logged

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: Found in a gun shop today
« Reply #13 on: December 04, 2009, 01:27:29 PM »
once upon a time i found a 30-06 at a pawn shop in selma alabama.
i wanted to see if in fact it was a sb2 frame... it was case hardend colored !!! :o
i mentioned to the guy of the unsafe firearm.
i opened the action.. and it had a  large firing pin for days inside!!!
the store owner said "if its not the right receiver, i give it to ya"
guess what i walked away with ;D
i tore her down before the guy could bat an eye!!!
solid frame.........
then called h&r, so the guy could be told it was not the right frame..
of course he did not believe me.... but i won !!! ;D
he made the deal... not me
i was just trying to give some safe advice.

what would you do ????
Logged
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline chevyone

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 100
  • Gender: Male
Re: Found in a gun shop today
« Reply #14 on: December 04, 2009, 01:45:39 PM »
I was on vacation and all my tools were in the truck, just not a long enough extension. So call H@R for the info and all was good ;D

Anyone have any idea what the value of the scope is?
It's a Redfield 5 star 1x-4x and looks like a shotgun or pistol scope. Very clear but is mounted back to far on the rail.

Thanks Kevin
Logged
Skin that smoke wagon and see what happens!!

You can't fix stupid!!!!!!
Pages: [1]   Go Up
« previous next »