« previous next »
Pages: [1]   Go Down

Author Topic: 7.62x39mm reloading data?  (Read 1025 times)

0 Members and 1 Guest are viewing this topic.

Offline 3006softpoint

  • GBO Supporter
  • Trade Count: (28)
  • Avid Poster
  • *****
  • Posts: 126
7.62x39mm reloading data?
« on: December 02, 2009, 04:13:26 PM »
I read an old post that said use bench mark powder! I went to the hodgdon sight and could not find any reloading data for bench mark! Lots of different data for other powders for the 7.62x39mm ! I will be using the 123 or 125 grain v max hornady bullet! Any help with choice of powder would be great! I am also looking for places to find data online for this round! Hodgdon is the only easy place to find data for me so far! So any help would be great! Thank you Dale
Logged

Offline Larry Gibson

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1069
Re: 7.62x39mm reloading data?
« Reply #1 on: December 02, 2009, 04:30:23 PM »
My "go to" load with 123-125 bullets in 7.62x39 for both bolt action and gas guns is 22.5 gr H4227 for use in cases with LR primers and 23 r in RP cases using SR primers.  Accuracy excellent and velocity/pressures are consistant with milsurp ammo.

Larry Gibson
Logged

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18195
Re: 7.62x39mm reloading data?
« Reply #2 on: December 03, 2009, 01:19:16 AM »
benchmark is to slow for good velocity in the 762x39. Probably the best powder and one that was designed just for the round is 1680/680
Logged
blue lives matter

Offline shootinpreacher48

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
Re: 7.62x39mm reloading data?
« Reply #3 on: December 03, 2009, 10:33:18 AM »
i haved also read that H335 is a great powder for the 7.62x39 you should try it, not any personal expierence though.
Logged

Offline carbineman

  • GBO Supporter
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 1322
Re: 7.62x39mm reloading data?
« Reply #4 on: December 03, 2009, 05:16:23 PM »
Like Lloyd says Accurate 1680 or WC680 milsurp are great for the 7.62x39mm
Logged

Offline R.W.Dale

  • Trade Count: (22)
  • Senior Member
  • *****
  • Posts: 2170
Re: 7.62x39mm reloading data?
« Reply #5 on: December 03, 2009, 08:25:55 PM »
Quote from: shootinpreacher48 on December 03, 2009, 10:33:18 AM
i haved also read that H335 is a great powder for the 7.62x39 you should try it, not any personal expierence though.

In my experience H335 tends to be too slow to get top velocities with 12Xgrain bullets. Works great for 150grn+ though

AA1680 or even better N-120 are really the two powders you need to be looking at.
Logged

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18195
Re: 7.62x39mm reloading data?
« Reply #6 on: December 04, 2009, 01:54:27 AM »
another powder ive had good luck with using 120-125s is ramshot terminator. Ive used it in a few differnt round and ive come to believe its nothing but a slightly faster burning batch of 2230aa
Logged
blue lives matter

Offline res45

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 194
  • Gender: Male
Re: 7.62x39mm reloading data?
« Reply #7 on: December 04, 2009, 04:00:27 PM »
My two favorite powders for X39 out of my SKS rifles with any 123 to 125 gr. SP,FMJ or V-MAX is either AA1680 hard to get locally or my go to powder Reloader #7.  I've had good success with IMR-4198 and the V-MAX also.  Lyman #49 manual has lots of good powder/bullet options for the X39 rd.  I'm going to get some H4198 soon and work up some loads with it also.





Logged
Linux Mint Mate 15

Offline Johnny6gun

  • Trade Count: (80)
  • Avid Poster
  • **
  • Posts: 180
Re: 7.62x39mm reloading data?
« Reply #8 on: December 05, 2009, 07:05:46 AM »
RL-7 works for me in the mini 30 and sagia x39

http://stevespages.com/310_1_122.html
Logged
Pages: [1]   Go Up
« previous next »