Author Topic: quickdtoo.......45 Colt carbine (Read 813 times)

poncaguy · « **on:** December 14, 2009, 03:11:10 PM »

Which direction does The rear sight tap off on the 45 Colt carbine?

quickdtoo · « **Reply #1 on:** December 14, 2009, 04:15:30 PM »

I don't think it matters Larry, mine was so loose I just pushed it out with my finger!!

Tim

poncaguy · « **Reply #2 on:** December 14, 2009, 04:21:21 PM »

Thank ya..............I'll give it a try, though I did manage to dig up a scope that just cleared the rear sight and hammer.........had a red dot on it, but got curious to see how good of groups it will shoot. I love the carbine..........any other Handi's that handy? I know my 30-30 isn't

quickdtoo · « **Reply #3 on:** December 14, 2009, 04:40:04 PM »

I'm workin on a 260 Remington Superlight in the new style synthetic stock, it should weigh about 6¾lbs with 3-9x40 scope, Wayne is reboring a 243 Superlight barrel for me.

Tim

Datil · « **Reply #4 on:** December 14, 2009, 05:01:56 PM »

Hope to see a range report When you get it back from Wayne!

Good Luck Tim and Merry Chirstmas to you and the Mrs.

Marv.

Spanky · « **Reply #5 on:** December 15, 2009, 04:30:54 AM »

My 5 lb. (with 3-9x32 scope) 32-20 is pretty handy.

Spanky

Blackhawker · « **Reply #6 on:** December 15, 2009, 05:32:13 AM »

Quote from: Spanky on December 15, 2009, 04:30:54 AM

My 5 lb. (with 3-9x32 scope) 32-20 is pretty handy.

Spanky

Spanky, where did you get a 32-20 Handi? Is that a custom job or did H&R once make 32-20's? Have I missed the boat here?

Spanky · « **Reply #7 on:** December 15, 2009, 06:23:25 AM »

Quote from: Blackhawker on December 15, 2009, 05:32:13 AM

Spanky, where did you get a 32-20 Handi? Is that a custom job or did H&R once make 32-20's? Have I missed the boat here?

My 32-20 is a "Trotter Special"

Spanky

Blackhawker · « **Reply #8 on:** December 15, 2009, 06:54:42 AM »

Uhh, you're gonna have to help me on that one. Is that a custom thing or is that an old version of a Handi like the "topper" etc?

Spanky · « **Reply #9 on:** December 15, 2009, 07:11:05 AM »

My barrel was a stub project. There are a few of 'em floating around here now.
the 32-20 is a natural for the Handi. It shoots great.
This thread shows my barrel being made.
http://www.gboreloaded.com/forums/index.php/topic,157037.0.html

Spanky

PHATINJUN · « **Reply #10 on:** December 15, 2009, 07:22:14 AM »

My .32H&R mag Handi is pretty Handi head shot tree rats ain't got a chance of stayin in the tree much less bang than a 22 also shoots 60gr and 93gr cast same hole every time @50 lots of lead takes em right out of the tree.

Kurt

Blackhawker · « **Reply #11 on:** December 15, 2009, 08:21:51 AM »

Quote from: Spanky on December 15, 2009, 07:11:05 AM

My barrel was a stub project. There are a few of 'em floating around here now.
the 32-20 is a natural for the Handi. It shoots great.
This thread shows my barrel being made.
http://www.gboreloaded.com/forums/index.php/topic,157037.0.html

Spanky

Ahh yes, I DO recall seeing that thread now. I wondered who ended up with that barrel. I would LOVE to have a Handi or classic carbine in that caliber. I don't know why it was never made. I would think that they would have made one from the start a long time ago.

poncaguy · « **Reply #12 on:** December 15, 2009, 11:56:34 AM »

I would love a 327 Federal Carbine......................