« previous next »
Pages: [1]   Go Down

Author Topic: 45 Colt choke  (Read 570 times)

0 Members and 1 Guest are viewing this topic.

Offline P.A. Myers

  • GBO Supporter
  • Trade Count: (65)
  • Senior Member
  • *****
  • Posts: 1344
45 Colt choke
« on: December 14, 2009, 03:54:09 AM »
I have a 45 barrel that will not chamber a 410 and it has a choke. I remove the choke to shoot it, but that leaves bare threads at the muzzel. I have a spare choke and need to decide to whack it off or bore it out. I think the difference is mainly cosmetic.
Logged
“Never give in, never give in, never; never; never; never - in nothing, great or small, large or petty -
never give in except to convictions of honor and good sense”
 Winston Churchill

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
Re: 45 Colt choke
« Reply #1 on: December 14, 2009, 04:09:38 AM »
     TC made some 45Colt barrels with removeable chokes designed for shooting 45 Colt shot loads but not .410's.  I have a 10" Octagon model, but I've never seen a S-14 barrel made that way.  I'd check on the rarity of it before I went to whacking.  Shooting 45's in it with the open threads does not hurt it in any way.  Walt
Logged

Offline Silvertp

  • GBO Supporter
  • Trade Count: (10)
  • A Real Regular
  • *****
  • Posts: 687
Re: 45 Colt choke
« Reply #2 on: December 14, 2009, 04:36:06 AM »
 You probably already know, that if the threads are on the outside, a good smith can make a cap to cover those threads, if damaging the threads is of any concern.

Maybe it is the rarest TC barrel of all and you just won the "lottery". 

Silvertp

Logged

Offline P.A. Myers

  • GBO Supporter
  • Trade Count: (65)
  • Senior Member
  • *****
  • Posts: 1344
Re: 45 Colt choke
« Reply #3 on: December 15, 2009, 10:15:56 PM »
The threads for the choke are internal. I am going to modify a spare choke, not the barrel or original choke. I have been shooting it with the choke removed, I just dont like these exposed threads.

The photo is another barrel [44mag]. I dont have a picture of the 45 barrel, which is a 10inch octagon.
Logged
“Never give in, never give in, never; never; never; never - in nothing, great or small, large or petty -
never give in except to convictions of honor and good sense”
 Winston Churchill

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
Re: 45 Colt choke
« Reply #4 on: December 16, 2009, 12:32:37 AM »
     The barrels were designed by TC to be shot with the choke for shot charges and with out the choke for normal 45 Colt ammo.  Millions of rounds of ammo have been shot through these barrels(they have always been one of TC's most popular) and as far as I know nobody has damaged the threads yet.  If yours is a 10" Octagon barrel I would think it has external threads on the barrel.
Walt      BTW I'm sending you a PM.
Logged

Offline yooper77

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1746
  • Gender: Male
Re: 45 Colt choke
« Reply #5 on: December 16, 2009, 02:56:10 AM »
Quote from: HellBound on December 14, 2009, 03:54:09 AM
I have a 45 barrel that will not chamber a 410 and it has a choke. I remove the choke to shoot it, but that leaves bare threads at the muzzel. I have a spare choke and need to decide to whack it off or bore it out. I think the difference is mainly cosmetic.

Don’t fix it if it isn’t broken.  If it labeled as 45/410 on the barrel and doesn’t allow chambering of 410 bore shotgun shells then T/C will repair it for free.

The exposed thread are not a problem when shooting 45 Colts, so your efforts to make a custom choke will probably end up damaging the barrel when you test fire the first round.

yooper77
Logged

Offline P.A. Myers

  • GBO Supporter
  • Trade Count: (65)
  • Senior Member
  • *****
  • Posts: 1344
Re: 45 Colt choke
« Reply #6 on: December 16, 2009, 03:11:40 AM »
No, it is labeled 45 Colt.  It has been my experience that 45/410 barrels group poorly in 45.  Waaaay too much freebore. Reminds me of shooting .452 in an old Colt .454 . They get down there, somewhere

          Merry Christmas
Logged
“Never give in, never give in, never; never; never; never - in nothing, great or small, large or petty -
never give in except to convictions of honor and good sense”
 Winston Churchill

Offline yooper77

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1746
  • Gender: Male
Re: 45 Colt choke
« Reply #7 on: December 16, 2009, 03:31:27 AM »
Yes, I have heard the 45/410 barrels are more of a novelty then a practical tool.  Plus 410 bore shotgun shells are too expensive.

Sounds like you have a hotshot barrel, made for the plastic shot cups loaded in the 45 Colt case and not 410 bore shells.  If so, then the chamber shouldn’t be too long. Have you shot it at all?

Merry Christmas,
yooper77
Logged

Offline P.A. Myers

  • GBO Supporter
  • Trade Count: (65)
  • Senior Member
  • *****
  • Posts: 1344
Re: 45 Colt choke
« Reply #8 on: December 16, 2009, 03:43:08 AM »
Yes, This is a 'hotshot' barrel. I have shot it a bit [I have 6 barrels].  Shoots very well. I would like to get a super14 in 45colt.

A curious thing is there are no dire warnings not to shoot bullets with the choke on. It squeezes down to about .380 so I don't intend to test it.


   Happy New Year
Logged
“Never give in, never give in, never; never; never; never - in nothing, great or small, large or petty -
never give in except to convictions of honor and good sense”
 Winston Churchill

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
Re: 45 Colt choke
« Reply #9 on: December 16, 2009, 09:01:31 AM »
     Mine will chamber a 2 1/2" 410 that's unfired but not a 2 1/2" fired hull.  Still a fair amount of freebore there.  I've not done any serious shooting with regular bullets so I really don't know how it'll shoot.  I know it recoils quite freely.  Ouch!  Walt
Logged
Pages: [1]   Go Up
« previous next »