Author Topic: Dragonov Recall  (Read 534 times)

0 Members and 1 Guest are viewing this topic.

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Dragonov Recall
« on: December 29, 2009, 09:45:08 PM »
 It maybe old news, but I just seen this. Thought I would share. It is from the CDNN site.
http://www.cdnninvestments.com/dragunovrecall.html




If you own a Norinco NDM86 .308 Dragunov please contact CUSTOMER SERVICE at 1-800-588-9500 immediately. It has been determined that certain commercial ammunition may produce a slam fire condition causing the firearm to fire out of battery. This can result in injury or death to a bystander or the shooter. A simple modification to the bolt assembly can easily remedy the situation. We are recalling only those .308 Dragunovs purchased directly or indirectly from CDNN Investments, Inc. prior to 1/1/2000. Please have your serial number ready when you call.

• DO NOT FIRE THE GUN AFTER RECEIVING THIS NOTICE!

• DO NOT ATTEMPT TO DIAGNOSE OR REPAIR THE FIREARM!

• DO NOT RETURN THE ENTIRE FIREARM. CONTACT US FOR INSTRUCTIONS!

• PLEASE DO NOT E-MAIL RECALL QUESTIONS. WE PREFER TO SPEAK WITH ALL OWNERS.

be safe

Lonny

Offline Mikey

  • GBO Supporter
  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Re: Dragonov Recall
« Reply #1 on: December 30, 2009, 12:28:38 AM »
Lon - thanks for the alert.  Mikey.

Offline coyotejoe

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 2937
  • Gender: Male
Re: Dragonov Recall
« Reply #2 on: January 19, 2010, 04:38:40 AM »
I had a slamfire with my Romanian PSL when I dropped a single round in the chamber and released the bolt. Scared the crap out of me but did no other harm. Apparently the resistance of stripping a round from the magazine and into the chamber slows the bolt enough to prevent slamfires but if you extract a chambered round you will see a very light firing pin indent on the primer. If someone would offer a titanium firing pin it would probably solve the problem, that huge steel firing pin has a lot of mass and inertia. Otherwise, don't release the bolt on a chambered round, but hang onto the charging handle and let it run forward slowly.
The story of David & Goliath only demonstrates the superiority of ballistic projectiles over hand weapons, poor old Goliath never had a chance.