Author Topic: Starting out and tring to decide which barrels.  (Read 800 times)

0 Members and 1 Guest are viewing this topic.

Offline SDN921

  • Trade Count: (16)
  • Member
  • *
  • Posts: 38
Starting out and tring to decide which barrels.
« on: December 30, 2009, 03:49:34 PM »
I just getting started with Encore's pistols.

Looking for opinions for 3 barrels to start with.
I do not reload at this time and for the mid-term do not plan on starting.
I have pistols in 22LR, 9mm, 357 Mag, 243 already
I have rifles in 204, 223, 25-06, 280, 30-06, 45-70 already.
So already keep this ammo handy.

1st Plinking / Varmants
9mm
357 mag
22 hornet
5.7mm x 28
223

2nd White tall deer
257 roberts
6.8 spc
7x30 waters

3rd Bigger game
454  cassul
45-70

Scott

Offline stubshaft

  • Trade Count: (8)
  • Contributor
  • ***
  • Posts: 489
  • ROA's Rule
Re: Starting out and tring to decide which barrels.
« Reply #1 on: December 30, 2009, 07:02:27 PM »
For an Encore pistol I would go with the Hornet and 308 followed by a 45/70.  With these barrels you have the full range pretty well covered.
If I agreed with you then we would both be wrong.

Offline doc-and

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 438
Re: Starting out and tring to decide which barrels.
« Reply #2 on: December 30, 2009, 09:14:35 PM »
I'd choose the 5.7x28 or 22K-Hornet, then the 308 Winchester and the 460 S&W Mag ;D

Here my 5.7x28


My 22K-Hornet


My 308 Winchester


Still waiting to order my 460 S&W Mag bbl ;D


docand 8)

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
Re: Starting out and tring to decide which barrels.
« Reply #3 on: December 30, 2009, 11:20:18 PM »
You have NOTHING that will take the skin off your hand yet.  Try the 500 S&W Magnum.

Offline mbopp

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 209
  • Gender: Male
Re: Starting out and tring to decide which barrels.
« Reply #4 on: December 31, 2009, 01:10:17 AM »
All those calibers and you don't reload?

From your list of choices:

1 .223
2 7X30
3 45-70

"The Constitution is not an instrument for government to restrain the people, it is an instrument for the people to restrain the government, lest it come to dominate our lives and interests." -- Patrick Henry, American Patriot

Offline Dezynco

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 970
Re: Starting out and tring to decide which barrels.
« Reply #5 on: December 31, 2009, 02:30:56 AM »
One thing no one has mentioned is that he really should consider a 22LR barrel for his pistol, especially since he does not handload.

Handgun hunting is quite a bit more challenging than hunting with a rifle, so SDN921 might consider a 22LR barrel in order to get in LOTS of trigger time.  One of the best purchases I made for my G2 Contender was a 12" 22LR barrel.  I have been able to afford to shoot it thousands of times.  All that practice paid off a week or so ago with I bagged a nice buck with my hunting barrel!

With my comments made, and considering that he does not handload, here are my picks (other than a good 22LR):
357
6.8
45-70

If he were to start handloading, then the options are endless, might even consider some cartridges that are not available for the Contender.




Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: Starting out and tring to decide which barrels.
« Reply #6 on: December 31, 2009, 03:20:37 AM »
Gary Reeder offers some nice barrels also. You can get loaded ammo from Cartridge Performance Engineering, and Andy will also reload your brass.
Here are some of his calibers I like, 310 GNR, 410 GRR 510 GNR, 378 GNR and the 240 Raptor, 257 Raptor & 6.5 Raptor.
http://www.reedercustomguns.com/
http://www.cartridgeperformance.com/

Now if you want to stick to factory barrels, I would say, a 223, 7mm08, 308, 30-06, 45-70 and the 500 S&W Mag.
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline mbopp

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 209
  • Gender: Male
Re: Starting out and tring to decide which barrels.
« Reply #7 on: December 31, 2009, 03:30:43 AM »
Hard to beat a .22 for cheap shooting.

I have a .357 Herrett barrel on the Contender. I bought a Lyman M flare die and load cast bullets for practice. Baseline loads are the lowest listed loads for the .35 Remington.
"The Constitution is not an instrument for government to restrain the people, it is an instrument for the people to restrain the government, lest it come to dominate our lives and interests." -- Patrick Henry, American Patriot

Offline SDN921

  • Trade Count: (16)
  • Member
  • *
  • Posts: 38
Re: Starting out and tring to decide which barrels.
« Reply #8 on: December 31, 2009, 10:19:04 AM »
Thanks for the replys.

I live in a townhouse no room to reload till I get a new house.
Forgot the 22 LR I think I will need to look at that also.

For Bigger game and fun I think I will go with a 17" 45-70 can use for Pistol and Rifle.
For Plinking / Varmint 15" 357 mag

For White Tail Deer Sill undecided
7-30 water or 7mm08

For white tail most of my shots in the last 35 years have been 25 yards to 250 yards.
With most being under 150 yards.
At these ranges would I gain much form going to the 7mm08?

Scott

Scott

Offline Dezynco

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 970
Re: Starting out and tring to decide which barrels.
« Reply #9 on: January 02, 2010, 02:32:20 AM »
As much as I LOVE the 7x30 Waters, since you are shooting an Encore, I'd go with the 7mm-08.  Cartridges are easy to find, and it's a very good round for deer hunting, especially at the ranges you describe.  Factory 7x30 Waters ammo is almost non-existent in my part of the country, and when you do find it, it's mostly leftover ammo that was designed for use in lever guns (flat point).  It's not hard to make from 30-30 brass, but since you're not a handloader, this will not be an option for you, and you'll be forced to scrounge for loaded ammo.

I's say go with the 7-08, UNLESS you opt for the handloading option.  I don't know if you know this, but you can purchase one of the Lee handloaders (the type that does not mount to the bench).  It takes standard dies, and does not take up any more space than a hammer.  you could have you a bin about 18" square and keep all your reloading supplies in it.  That's what I used to do before I got the space to set up a bench.  All you need is the dies for your caliber, the little hand press, primers, bullets and a can of powder.  If you use Lee dies, the die set even comes with a little chart and a dipper for the powder charge.  The Lee hand press will definitely give you an upper body workout, but all of your stuff will nearly fit in a shoe box!  Check it out....