Author Topic: 30-30 (Read 1761 times)

SHOOTALL · « **on:** December 28, 2009, 08:59:12 AM »

Ok i got a deal . I think ?
30-30 win made around the 70's . wood ok metal so so its one of the ones that the blue wears off easy but no rust yet . Paid $265.00 . Had a side mt scope on it . Dealer deals in new stuff . He thought the mount had holes drilled for it . It really used the holes to mount a peep sight and a replacement screw for the finger lever pin screw . Bore is very nice . New screws are ordered . It also had a sling set up - hole in stock and attachment on mag. tube . Did i get took ?

AtlLaw · « **Reply #1 on:** December 28, 2009, 09:26:02 AM »

Sounds okay to me mon!

I paid a just a little less for one of the same discription a year or 2 ago.

Dee · « **Reply #2 on:** December 28, 2009, 10:05:12 AM »

Sounds ok to me too. When you get it put back together it will look like this 52 year old clunker. Sans the sights of course.

SHOOTALL · « **Reply #3 on:** December 29, 2009, 01:06:52 AM »

Well parts are ordered and on the way ! Guess its time to load some ammo for it .

gstewart44 · « **Reply #4 on:** December 29, 2009, 11:16:42 AM »

I say you made a very good deal providing it doesn't group like a shotgun. Let us know how it does at the range.

dpe.ahoy · « **Reply #5 on:** December 29, 2009, 04:27:20 PM »

In this part of the country, ya got a very good deal. Everybody gotta have a 30-30.

DP

SHOOTALL · « **Reply #6 on:** December 30, 2009, 02:03:26 AM »

Just waiting for ordered screws to show up . loaded some 150's and 170's to try . Also was looking for bullets at Green Top and all that was aval. was 125 gr FP 30-30 bullets so i got some . I know its light but my favorite rifle is a mod. 94 rifle ( 24" bbl) 7X30 waters . It and 120 gr. bullets have taken alot of deer and turkeys in the past 26 years . Will let ya know how it all works . If the screws get here before sat. maybe it will be tested on deer as the season runs thur. sat here.

jlchucker · « **Reply #7 on:** December 30, 2009, 03:25:02 AM »

Sounds like you did OK. this could be a perfect truck gun.

SHOOTALL · « **Reply #8 on:** December 30, 2009, 03:33:06 AM »

There is more to the story , later !

SHOOTALL · « **Reply #9 on:** January 04, 2010, 08:27:02 AM »

Well 4 of the screws arrived ( the 4 filler screws for the holes to mount a rear sight ) . Checked and the other 2 screws were omited . Now reordered ! Well i didn't want to wait so i shot it with the screw for the scope base installed . It was loose and sticking out about 5/16 of an inch . The gun would hit 16 oz water bottles at 50 yards on demand . I realize that ain't min of anything but would sure do a deer in .

demented · « **Reply #10 on:** January 05, 2010, 11:05:34 AM »

With me behind the trigger, I'd do well to place a hit on an eight inch pie plate @ 100 yards with any of my 94's. Don't seem to matter, I've downed enough deer with them to fill a dump truck, seems the deer can't tell I cain't shoot! Here your new rifle would bring $300 or better any day, anytime.

woodchukhntr · « **Reply #11 on:** January 14, 2010, 01:41:43 PM »

OOPS, wrong place! I appologize for putting this in the .30-30 topic when I meant to start a new one. I think the problem was the loose nut behind the keyboard

I was about to get a nice Winchester 94 in the 4,980,000 S.N. range, but decided on a minty Glenfield 30G instead. The rifle has pressed checkering on the stock which I am not really happy with, but otherwise shows very little use. It is in the 20,000,000 S.N. range (!). Yikes, 20 million? It is obviously a Marlin with Glenfield logo. I put a peep sight on it, and like the option of using a scope if the peep doesn't work for me. This is the big advantage over Winchesters as far as I am concerned.

Does anyone have any more info on the Glenfields? How about cast bullets with the microgroove barrel?

SHOOTALL · « **Reply #12 on:** January 15, 2010, 02:08:38 AM »

Well all the screws are in and everything works well . The 125 gr bullets work well . Its to late to try on deer this year . I loaded some 165 lead bullets and they work , but i need an expander die as i cut a sliver of lead off when seating a bullet .

Savage .250 · « **Reply #13 on:** January 15, 2010, 02:49:06 AM »

Sounds like you got yourself a ......shooter.

SHOOTALL · « **Reply #14 on:** January 15, 2010, 03:02:59 AM »

hope so ! time will tell - need to shoot a target soon.

jlchucker · « **Reply #15 on:** January 15, 2010, 04:48:14 AM »

Quote from: woodchukhntr on January 14, 2010, 01:41:43 PM

Does anyone have any more info on the Glenfields? How about cast bullets with the microgroove barrel?

The Glenfield, as well as a lot of other re-named Marlins that aren't identified as 336's, are pretty much a 336 with cheaper wood. Some have front sights dovetailed directly into the barrel instead of on a ramp, as the more expensive 336 series does. They should work every bit as good as the more expensive 336's. If you want to turn your Glenfield into a project gun, you could buy some fancier wood for a new stock and forearm, and maybe a few other appearance-related items, and have the Marlin of your dreams. You could go as far with it as money will take you, with pretty much the same results as if you started with the more expensive 336 version.

Swampman · « **Reply #16 on:** January 15, 2010, 04:56:01 AM »

The Glenfields I've owned were more accurate than my Marlin 336s. I really like them.

Dee · « **Reply #17 on:** January 15, 2010, 05:06:00 AM »

The only difference in the two are the stampings on the barrel and stock.

Swampman · « **Reply #18 on:** January 15, 2010, 05:33:43 AM »

My Glenfields don't have barrel bands.

Dee · « **Reply #19 on:** January 15, 2010, 06:01:47 AM »

If that's the case if the barrel bands on Marlins are putting pressure on the barrel it is a possibility then. Proper fitting could howeve,r solve the problem.