EZ-open mod

[P.A. Myers]

I have a 45k serial number frame I am going to send in for the ez-open upgrade. If you have done this, how do you like it? How long did it take?

[lynneil]

I have both frames. I like the easy open better. I think that it's trigger is a little harder to rework for a lighter pull. I would call the factory and ask how long it might take.

[P.A. Myers]

I went to the website Sunday and found out they can not send it back to me. NV and AZ are looking better all the time.
Thanx lynneil.

[Czech_too]

"I went to the website Sunday and found out they can not send it back to me. NV and AZ are looking better all the time."

I may be showing my ignorance here, or I missed something, but would you care to explain?  I have at least pre-ez-open frame that needs some work and I really don't want it changed over.
Brian

[jumpsteady]

I believe that he is in the Peoples Republik of Kalifornia.

[tcman25/06]

     

    I have sent one back to the factory for the ez-open re-do .  I will never do it again, one of my barrels is a 410 and it will not fire on the re-done frame.  But it works fine on my newer frames.  When I called TC they wanted me to send in the 410 so they could do something with it to make it fire.  Buy a newer ez-open frame and you might be happier!!   

                                                                tcman

[P.A. Myers]

T/C also told me if I didn't include the barrel for the mod, it would no longer fit. I have eight barrels and two frames, I may not do this.

Here in the Red West [formerly Golden], you can no longer ship a gun for any reason. You must use an FFL, both ways.

California is fighting crime by treating everyone like criminals, except the criminals.

[Czech_too]

There is an individual in "the Red West", who comes recommended when it involves T/C's.  James Henry, tccraft1@earthlink.net
 
I bought a replacement hammer off of him last year.  He offered to do the install but I opted to do it myself.  Been thinking of asking him about this frame I'm having trouble with but funds are a little tight right now so I've been holding off.

It might be worth contacting him and maybe you can deliver/pickup it in person.

Brian, in Ohio aka Rustbelt

[P.A. Myers]

Thanx Brian, I do have a local smith that I can go to. I was going to do the EZ-mod because I have some tight barrels and that the mod includes all new parts except for the bare frame. These frames have been shot a lot, but are not badly worn and still function fine. I think I will just have one reblued and have him fit the problem barrels. One 44mag 14inch will become a 9inch.