Author Topic: Building a small reloading bench  (Read 1258 times)

0 Members and 2 Guests are viewing this topic.

Offline dw06

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1074
  • Gender: Male
Building a small reloading bench
« on: February 16, 2010, 08:09:35 AM »
 Since our move last year,I have no reloading bench.So I need a small one with some storage area under it. I keep coming back to the idea of just buying a 24''-30'' kitchen base cabinet with drawers, and topping it with either the counter top used on them,or a piece of solid door which I already have.Seems like a quick way to do it,and would look nice to boot.Also can buy dents and damaged ones at lowes or home depot.
 Has anyone here done this? If so chime in with any advise,and maybe a pic or two!
If you find yourself in a hole,the first thing to do is stop digging-Will Rogers

Offline gray-wolf

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 127
Re: Building a small reloading bench
« Reply #1 on: February 16, 2010, 09:15:48 AM »
Yes it is done all the time.
Perhaps an extra piece of wood if needed under your press for support.
 Might even get a small cabinet to go on the wall above the bench for additional storage.
Just make sure the top is fastened well so it does not lift up.

GW.

Offline helotaxi

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 375
Re: Building a small reloading bench
« Reply #2 on: February 16, 2010, 09:20:46 AM »
Sounds like a great plan!  I'm currently building mine as part of my workbench down one whole side of my garage.  It's built on several base cabinets meant for garage storage and two long sections of finished formica countertop.  I'll have a lot of cabinet space and 14' of uninterrupted benchtop.  If I could convince my wife to let me have a bench inside the house, I'd be going the route that you're talking about.

Offline teamnelson

  • Trade Count: (30)
  • Senior Member
  • *****
  • Posts: 4487
  • Gender: Male
Re: Building a small reloading bench
« Reply #3 on: February 16, 2010, 09:24:13 AM »
A solid door for the top would give you a stronger base for the press, vise and anything else. I found a small 18"x24" bench in the trash somebody made with angle iron; has a steel top but I am on the lookout for a nice solid door to cut down for a top. I did find a piece of heavy vinyl that I cut down for the top so small parts don't bounce as much if I drop them. Just found an industrial drafting light at Goodwill for $3 yesterday. I was kinda hoping they were going to sell the drafting table too ... all steel frame, solid 1" thick top, lots of drawers ... but they're keeping it to fold clothes on.
held fast

Offline Dances with Geoducks

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 338
Re: Building a small reloading bench
« Reply #4 on: February 16, 2010, 09:28:08 AM »
I bought a $10 yard sale folding cafe table. Must a been made in the 50s or 60s, nice heavy tabletop.


Offline dw06

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1074
  • Gender: Male
Re: Building a small reloading bench
« Reply #5 on: February 16, 2010, 11:48:48 AM »
Yes it is done all the time.
Perhaps an extra piece of wood if needed under your press for support.
 Might even get a small cabinet to go on the wall above the bench for additional storage.
Just make sure the top is fastened well so it does not lift up.

GW.

Well how bout that,forgot that I have 7-8 cabinets stashed away and could use one or two above it! 8) Thanks for bringing that up ;)
If you find yourself in a hole,the first thing to do is stop digging-Will Rogers

Offline 45-70.gov

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 7009
  • Gender: Male
Re: Building a small reloading bench
« Reply #6 on: February 16, 2010, 11:54:02 AM »
3/4 plywood  doubles  up  glued together for the top

2  ,,,,,2 drawer  file cabinets  for the base 
when drugs are outlawed only out laws will have drugs
DO WHAT EVER IT TAKES TO STOP A DEMOCRAT
OBAMACARE....the biggest tax hike in the  history of mankind
free choice and equality  can't co-exist
AFTER THE LIBYAN COVER-UP... remind any  democrat voters ''they sat and  watched them die''...they  told help to ''stand down''

many statements made here are fiction and are for entertainment purposes only and are in no way to be construed as a description of actual events.
no one is encouraged to do anything dangerous or break any laws.