« previous next »
Pages: [1]   Go Down

Author Topic: It's alive!  (Read 1277 times)

0 Members and 1 Guest are viewing this topic.

Offline eye shot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 665
    • Mike's Obituary
It's alive!
« on: January 12, 2010, 01:23:26 PM »
1936 Polish Radom 98 Mauser 8mm short rifle. I started to sporterise this rifle gone on forty years ago. Its been in pecies a basket case since. I was thinking of a new barrel because looking in the original it was very dark and could barly see the lands. I decided to try the old barrel if I could get it fairly clean. For two days I soaked it in Kroil then degreased and made a five dollar electric fouling bore cleaner. Fifty minutes later alot of green and black come out but the bore still looked dark. I brushed it out one more time with Kroil and the bore was actually very bright. Now I think I'll lap it some.
Logged
RIP Mike. Died on July 14th, around 2am, with his family at his side, he went peacefully to be with god.

http://www.sent-trib.com/obituaries/michael-l-schulte

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: It's alive!
« Reply #1 on: January 12, 2010, 02:35:33 PM »
Keep us posted and pics if you please.
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline Mikey

  • GBO Supporter
  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Re: It's alive!
« Reply #2 on: January 14, 2010, 01:13:55 AM »
eye shot:  if the bore finally came out bright you may not have to lap it at all.  A properly lapped bore is so shiny that you can barely see the rifling, because it is so bright.  If you got all that crud out of the bore she should probably shoot very well for you.  Save yourself some trouble and shoot it first and see how she does.  Just a thought. 
Logged

Offline eye shot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 665
    • Mike's Obituary
Re: It's alive!
« Reply #3 on: January 25, 2010, 04:48:53 PM »
Just ordered a Fajen black synthetic stock from Midway USA on sale till end of the month. $18 off at $46.99!
Logged
RIP Mike. Died on July 14th, around 2am, with his family at his side, he went peacefully to be with god.

http://www.sent-trib.com/obituaries/michael-l-schulte

Offline eye shot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 665
    • Mike's Obituary
Re: It's alive!
« Reply #4 on: January 27, 2010, 01:06:41 AM »
What would be the best finish for this old rifle, cold blue or a spray on finish?
Logged
RIP Mike. Died on July 14th, around 2am, with his family at his side, he went peacefully to be with god.

http://www.sent-trib.com/obituaries/michael-l-schulte

Offline Scibaer

  • Central Michigan, USA, Earth
  • Trade Count: (25)
  • Senior Member
  • *****
  • Posts: 1686
  • FATE FAVORS THE WISE
Re: It's alive!
« Reply #5 on: January 27, 2010, 05:17:24 AM »
with the synthectic stock, i would think a spray on finish would be the way to go, no real upkeep that way.
 i like the dura-coat, flat black or dark gray
Logged

Offline eye shot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 665
    • Mike's Obituary
Re: It's alive!
« Reply #6 on: January 27, 2010, 03:01:34 PM »
I got the Fajen stock today. That old rifle droped right in and seems to fit perfect. The barrel is fully floated and didn't even have to rasp in a bolt handle notch. The gun emty only weighs 6#. This Polish Mauser is now ready to fire if I only had sights- scope mounts for it. Oh back in the early 70's I did check the head spacing and fired 100 rounds . I don't want to drill&tap the reciever because this rifle has not been brushed. It still has the eagle crest and F.B. Radom 1936 on it.
Logged
RIP Mike. Died on July 14th, around 2am, with his family at his side, he went peacefully to be with god.

http://www.sent-trib.com/obituaries/michael-l-schulte

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: It's alive!
« Reply #7 on: January 27, 2010, 04:01:18 PM »
Please post pics.
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline eye shot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 665
    • Mike's Obituary
Re: It's alive!
« Reply #8 on: January 27, 2010, 04:29:59 PM »
Logged
RIP Mike. Died on July 14th, around 2am, with his family at his side, he went peacefully to be with god.

http://www.sent-trib.com/obituaries/michael-l-schulte

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: It's alive!
« Reply #9 on: January 27, 2010, 04:36:00 PM »
Nice thanks for posting.
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline eye shot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 665
    • Mike's Obituary
Re: It's alive!
« Reply #10 on: January 27, 2010, 04:45:06 PM »
As you can see I haven't done any metal work yet, but thats next. I have other pic but was having alot of trouble with fotobucket tonight.
Logged
RIP Mike. Died on July 14th, around 2am, with his family at his side, he went peacefully to be with god.

http://www.sent-trib.com/obituaries/michael-l-schulte

Offline eye shot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 665
    • Mike's Obituary
Re: It's alive!
« Reply #11 on: February 05, 2010, 05:54:47 AM »
I want to check accuratcy befor Dura coating metal. Scope is mounted with ATI clamp on mount.
Logged
RIP Mike. Died on July 14th, around 2am, with his family at his side, he went peacefully to be with god.

http://www.sent-trib.com/obituaries/michael-l-schulte

Offline Masterblaster1

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 223
Re: It's alive!
« Reply #12 on: February 05, 2010, 07:33:48 AM »
Let me know when you shoot it if that ati clamp mount holds a zero. Thought about getting one but wonder if they can be relied upon to hold zero
Logged
Pages: [1]   Go Up
« previous next »