« previous next »
Pages: [1]   Go Down

Author Topic: project possibilities  (Read 589 times)

0 Members and 1 Guest are viewing this topic.

Offline rkeltner

  • Trade Count: (3)
  • Member
  • *
  • Posts: 92
  • Gender: Male
project possibilities
« on: February 15, 2010, 08:52:56 AM »
i recently bought a hunsman bbl. with a stuck breechplug, knowing full well the bore may be bad,. well the jury's still out on the bore (it doesn't look good though), but i'm looking at the possibilities ahead of me. i know there are some outfits that will rebore (a .54 huntsman sounds nice!), or i suppose i could reline or stub the breech. (i have a .458 groove 1 in 24 stainless bbl. that's just singing for use!) i'm entertaining suggestions, with details about the mechanics for applying them!
Logged

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Re: project possibilities
« Reply #1 on: February 15, 2010, 12:05:34 PM »
Steel wool the bore and shoot it? Send it to Remington and say it doesn't work? Cut it to 16.5" and have a BP truck gun? Adapt one of those blank powered golf ball shooters? Speargun for mangrove snapper. From shore :)
Logged

Offline rdb

  • Trade Count: (2)
  • Member
  • *
  • Posts: 34
Re: project possibilities
« Reply #2 on: February 17, 2010, 05:14:07 AM »
I like the speargun idea. What do you think would be a good starting charge?   ;)
Logged

Offline rkeltner

  • Trade Count: (3)
  • Member
  • *
  • Posts: 92
  • Gender: Male
Re: project possibilities
« Reply #3 on: February 17, 2010, 07:52:36 AM »
black powder archery? ;D ::) ::) :D
Logged

Offline matthew_h

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 166
  • Gender: Male
Re: project possibilities
« Reply #4 on: February 17, 2010, 11:05:16 PM »
clean out the bore and shoot it . i have seen some black powder guns with nasty bores still shoot just fine with the right load . 80 grains of powder and a tight fitting bullet and it may still be deer accurate at 70 yards or so .

my step dad has a traditions side lock that has a pitted bore , with 85 grains of goex and a t/c 240 grain shock wave its dead on at 70 yards . if it don't shoot straight then a re-bore or possibly have it made into a smooth bore and have screw in chokes fitted .
Logged
Pages: [1]   Go Up
« previous next »