Author Topic: 454 Casull Load with cast bullets question  (Read 993 times)

0 Members and 1 Guest are viewing this topic.

Offline WESTTX4570

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 105
  • Gender: Male
454 Casull Load with cast bullets question
« on: March 06, 2010, 05:07:44 AM »
Just bought  a good amount of cast bullets for my 454 Casull for hog hunting. They are a .452 dia. gc that are supposed to be 360gr hard cast. All the bullets are demensionally exact and look to be cast of linotype. Here is the question, they all weigh in at 338 gr. , would I still use the load data for a 360 gr FNGC or use the data for a 335 gr FNGC? The price seemed to be pretty good for these bullets and the fella I purchased them from in Ky was nothing but great. $25.99 shipped per 100? If I can get a good load worked up for them, seem  to be some good hog medicine.

Thank you,
West
"Be thankful that we're not getting all the government we are paying for." Will Rogers

Offline WESTTX4570

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 105
  • Gender: Male
Re: 454 Casull Load with cast bullets question
« Reply #1 on: March 06, 2010, 05:31:47 PM »
Am I overthinking this and just go with my 360gr. FNGC data? There is 2gr. difference between the Max load given by Hodgdon in the two bullet weights using H110.
"Be thankful that we're not getting all the government we are paying for." Will Rogers

Online Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26945
  • Gender: Male
Re: 454 Casull Load with cast bullets question
« Reply #2 on: March 06, 2010, 05:38:46 PM »
Use data for the bullet weight you have generally speaking now what someone claims it should weigh. With a cast bullet most times that's fine. One thing you need to watch for tho is how much of the bullet is in the case and how much is NOT. That changes the capacity of the case and can affect pressures.

If the nose is particularly short on a heavy bullet that means it is intruding big time into the case capacity. I have no way of knowing how those things factor in. Does the maker provide any data for them?


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline WESTTX4570

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 105
  • Gender: Male
Re: 454 Casull Load with cast bullets question
« Reply #3 on: March 06, 2010, 05:59:58 PM »
GB,
No Sir, he did not provide any load data. Hogdon shows a min. of 23gr of H110 for a 335 gr FNGC and a min. of 21 gr for a 360 gr FNGC with a max of 26 gr for the 335gr bullet and 24 gr for the 360gr bullet. I do understand the loss of case capacity with the longer bullet seated to the canuler, therefore I will start at the bottom end of the suggested 360gr load data and work up slowly, paying careful attention to pressure signs and accuracy.

Thank you,
Brandon
"Be thankful that we're not getting all the government we are paying for." Will Rogers

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
Re: 454 Casull Load with cast bullets question
« Reply #4 on: March 07, 2010, 01:54:33 PM »
My guess would be that you should have no trouble with the data for the liter bullet. That said I don`t think that any of the hogs you shoot will be able to tell the difference if you go 2 gr. lower.

Offline WESTTX4570

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 105
  • Gender: Male
Re: 454 Casull Load with cast bullets question
« Reply #5 on: March 08, 2010, 05:02:08 AM »
I doubt they would either, lol. Just want to make sure I have enough oomph at 75 to 100 yards, thats about the closest I am able to get to these jokers around here.
"Be thankful that we're not getting all the government we are paying for." Will Rogers