Author Topic: New Reloading table Build. (Read 741 times)

sk330lc · « **on:** March 27, 2010, 05:05:51 PM »

Finally got around to Building an other Reloading Table Last Weekend. Got My RC press and powder measure Mounted today. Thought I would take some Pics while it's clean. Heaven knows it won't stay Like this.

hillbill · « **Reply #1 on:** March 27, 2010, 05:16:59 PM »

very nice!! mine is of similar construction. i screwed it to the wall for stability and and covered it with a high quality short nap outdoor carpeting to keep things from rolling around.

sk330lc · « **Reply #2 on:** March 27, 2010, 05:20:42 PM »

Quote from: hillbill on March 27, 2010, 05:16:59 PM

very nice!! mine is of similar construction. i screwed it to the wall for stability and and covered it with a high quality short nap outdoor carpeting to keep things from rolling around.

Thanks!
How do you clean spilled powder Up? Can you take the Carpet off and dump it out side?

hillbill · « **Reply #3 on:** March 28, 2010, 02:56:41 AM »

i just take a stiff brush and sweep it off in the floor where it gets swept up with everything else. i can take the carpet off as it is held on by some screwed on trim pieces around the edges of the bench.i see by your pics yu really like that GREEN equipment! happy loading!

Oldshooter · « **Reply #4 on:** March 28, 2010, 03:04:02 AM »

Looks good sk330lc, Was wondering why the lower shelf does not go all the way to the back?

When i first saw it i figgered it was to allow foot room but then in the other picture the shelf is in the front.

I am about to begin my new bench and getting some Ideas. Thanks for the post

sk330lc · « **Reply #5 on:** March 28, 2010, 09:07:10 AM »

Quote from: Oldshooter on March 28, 2010, 03:04:02 AM

Looks good sk330lc, Was wondering why the lower shelf does not go all the way to the back?

When i first saw it i figgered it was to allow foot room but then in the other picture the shelf is in the front.

I am about to begin my new bench and getting some Ideas. Thanks for the post

No the shelf is in the back. The pic does make it look like it's in the front. I put it in the back, for foot room Like you suggested.

hillbill,
I love Green . It's my Favorite Colar. Had a few issues with the Turret press but I fixed the. I had some cheap red stuff and finally had enough of it. enough said.

necchi · « **Reply #6 on:** March 28, 2010, 09:08:10 AM »

Looks nice an solid, a good bench IS a big deal. I'm satisfied with the light version I made from a computer desk and added 2' x 4' plywood top, but I would like the added weight,,,maybe someday $:-\$

Green is good

sk330lc · « **Reply #7 on:** March 28, 2010, 09:32:08 AM »

I had $27 In the 7 8' 2"x4" to Build it. I already had a 4'x4'x3/4" piece of plywood, the Polyurathan, wood glue and screws. Total investment was Maybe $45. Had about 3hours Building ,staining,and sealing it. Was Fun to do! Would make a nice writing desk too.

sk330lc · « **Reply #8 on:** March 28, 2010, 09:51:00 AM »

Few more pics added to see shelf and under bench better.

Oldshooter · « **Reply #9 on:** March 28, 2010, 10:48:29 AM »

Ok I see now, must have been the camera angle or sumpn.

Very nice the under stuff looks stout !

Savage · « **Reply #10 on:** March 28, 2010, 12:42:15 PM »

I don't believe my eyes!!! You drink Maxwell House coffee!!
Oh yeah, nice job on the bench.
Savage

sk330lc · « **Reply #11 on:** March 28, 2010, 12:48:28 PM »

Quote from: Savage on March 28, 2010, 12:42:15 PM

I don't believe my eyes!!! You drink Maxwell House coffee!!
Oh yeah, nice job on the bench.
Savage

Sorry I have to say I don't. Some of my Family members do and they save them for me. Their great for storing brass.

Savage · « **Reply #12 on:** March 28, 2010, 01:22:01 PM »

Sorry I have to say I don't. Some of my Family members do and they save them for me. Their great for storing brass.
[/quote]

Yep. I use Folger's cans myself------------

Savage