Just purchased a new Kahr PM9 with Crimson Trace

[PAHUnter04]

Hi Guys:

I just picked up a new Kahr PM9 with the CT on triggerguard. I should be putting it through it's paces soon. I really like the CT on the triggerguards, I have them on my model 27 .40 cal Glock and my Ruger .380 LCP. The only problem is finding a holster that fits with the CT attached for the Kahr.

What I really want is a owb clip on holster. The ONLY one I can find is the Galco paddle speedmaster. It is really made for the GW9, that means the 4in barrel compared to 3in. in the PM9. And at $70.00 bucks, it ain't cheap. LOL 

Tim at Holland Holster Co. made my LCP, CT holster and it is GREAT. But he doesn't have the Blue gun yet for the PM9. 

In my other 9's I favor the Cor-Bon 115's at about 1350 FPS. I will probably do a 200 round break in with some Blazer 9mm I have laying around.

Any other insight about a clip, or paddle OWB holster please let me know.

Regards PAH

[Scibaer]

PAH,
 check the top of the forum for the sticky notes. there are a couple of websites listed in there, that may be what your looking for.
 we will be looking forward to a range report from you on how the PM9 wrings out.
 as for clips, Kahr clips are limited to factory units... far as i know ... not any aftermarket one's that i know of.
but if you DO find a source for them, let us know that too.

[PAHUnter04]

Hi Guys:

Well it was a bright and sunny day, so I snuck out for an hour at lunch time to my local range to start the break in of my Kahr PM9.

Well all total I ran over 150 rounds through it without a burp. It ate over 100 rounds of cheap Blazer ammo, some Gold Dots, and about 25 hot, Cor-Bon 115 grn HP's. The Cor-Bon are very accurate and hit hard at 1350 fps. and 466 ft/lbs.

The only thing that I can sort of fault is that with the Crimson Trace on the triggerguard, it takes up some space INSIDE the triggerguard. I have to squeeze the trigger with the front pad of my index finger. If I squeeze the trigger at the web it sort of pinches a bit. I do have sort of big hands, but just take that as a FYI when using the CT.

Now the main spring on the slide is STRONG. It takes two men and a boy to hold the slide back and pop the retaining clip when you want to take it apart for cleaning. 

Besides that, the workmanship is excellent, trigger pull long but smooth, and the lil gun is accurate. I shot at 7 yards, 15 yards, and 25 yards. Even at 25 yards, no Crimson Trace, I can keep six out of six shots in the chest area.

This is a quality firearm. It is right up there with my Colts and S&W's. It's not cheap, but  you can bet your life on it.

Regards PAH

[paul105]

These are Kahr factory mags, but about $10 ea less than direct from Kahr.
http://www.cdnninvestments.com/kahrmags.html

I got CW40 Kahr mags from Davidson's for a $32.50 ea.   My dealer said he could get them from his supplier for $30 ea.

Shipping was about the same for all.

Don't know of any after market mags for Kahr's.

Paul

[Scibaer]

good find, i will add that link to the sticky page.. thanks

[PAHUnter04]

HI Guys:

In my search for a holster, I found The Holster Store on ebay. I bought a clip on IWB brown holster for the crimson trace trigger guard setup for my PM9 for $38.00 delivered. This is an everyday price.

I got to say, it is a quality product. The stiching and leather seem every bit as good as my Galco and Bianchi holsters. 

Check them out if you are looking for a new holster for your ccw.

Regards... Jim P.