Author Topic: Howitzer designs and supply locations  (Read 800 times)

0 Members and 1 Guest are viewing this topic.

Offline barefiel76

  • Trade Count: (0)
  • Member
  • *
  • Posts: 52
Howitzer designs and supply locations
« on: April 17, 2010, 04:39:28 PM »
I have looked through a ton of the old pages and pictures. There are incredible Howitzer pictures, but I have not found any barrel drawings for a Howitzer. Does anyone have their drawings?  I am thinking 3" OD and length may vary. Also, I read on one page that some guys were looking for scrap. Where is the most common place to find scrap for turning barrels? Any suggestions for places in Michigan? Thanks, greatly appreciated.

Offline dan610324

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2413
  • Gender: Male
  • bronze cannons and copper stills ;-))
    • dont have
Re: Howitzer designs and supply locations
« Reply #1 on: April 18, 2010, 02:34:21 AM »
how about this drawing ??
its just to scale it for fox balls
Im sure that any decent scrap yard have some pieces of hot rolled bars
Dan Pettersson
a swedish cannon maniac
interested in early bronze guns

better safe than sorry

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Howitzer designs and supply locations
« Reply #2 on: April 18, 2010, 07:45:00 AM »
Which howitzer?

I have drawing of the Mt. Howitzer and the 24 PDR Flank howitzer and I think a 6 PDR field howitzer.

By the way if you have a picture if a barrel, just measure and scale the picture.

Offline guardsgunner

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 421
Re: Howitzer designs and supply locations
« Reply #3 on: April 18, 2010, 12:17:48 PM »
I have AOP Mt. Howitzer drawings if you want to borrow them. Seems to me your in the area anyway.

Bob

Offline carronader

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 561
  • Gender: Male
  • What? me worry.
Re: Howitzer designs and supply locations
« Reply #4 on: April 19, 2010, 03:58:52 AM »
Very generous offer Guardsgunner , Barefiel , better to decide first which howitzer you want. The Brit 5.5 from Napoleonic era is pretty basic , looks not bad , and the carriage maybe not so much to build as the Frog , Prussian , Russian etc.You will get this on here all the time , " Give us a Clue " because there are just so many to choose from. attached a scan.
Scottish by birth and by heart.

Offline barefiel76

  • Trade Count: (0)
  • Member
  • *
  • Posts: 52
Re: Howitzer designs and supply locations
« Reply #5 on: April 19, 2010, 04:11:12 PM »
Ok, I really like the Howitzer Double D found. I have no doubt that I can figure out the measurements. I just thought it would be pretty cool to have a scale to work from. My other cannon pictures from last April do not represent a "true" cannon example. It was an incredible barrel from Dom and a carriage I made. Guardsgunner, sounds great, but to be honest I am not sure what that looks like.  Anyway, I am thinking along the lines of Double D's only 4"od x about 24"long. Roughly.

Oddly enough, my last build was in the spring. Must be a different form of spring fever.


Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Howitzer designs and supply locations
« Reply #6 on: April 19, 2010, 04:42:19 PM »
The Gun I found was a Mt Howitzer and the best deal for you  for plans is AOP!  Take Guardsgunner up on his offer, you won't regret it!

Offline xo18thfa

  • Trade Count: (0)
  • Member
  • *
  • Posts: 19
  • Gender: Male
Re: Howitzer designs and supply locations
« Reply #7 on: April 30, 2010, 11:16:54 AM »
Here's a M1835
Bob Sorenson
Las Vegas, Nevada

Hitting the target is a matter of training, hitting the impact area is a matter of safety.

Offline carronader

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 561
  • Gender: Male
  • What? me worry.
Re: Howitzer designs and supply locations
« Reply #8 on: April 30, 2010, 11:49:31 AM »
damn good drawing xo.
Scottish by birth and by heart.

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Howitzer designs and supply locations
« Reply #9 on: April 30, 2010, 11:58:31 AM »
The AOP folio also includes drawings of the carriage.
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”
--Winston Churchill

Offline barefiel76

  • Trade Count: (0)
  • Member
  • *
  • Posts: 52
Re: Howitzer designs and supply locations
« Reply #10 on: May 02, 2010, 04:53:08 PM »
So I have started working on drawings for both barrel and carriage. The drawings I borrowed a are great at giving measurements and ideas. They are a little difficult to follow the carriage drawings.

I will do a better job of documenting this build than I did with my last. Thank you for the help!